Pros
- Connects compatible Lightning audio sources to common 3.5mm AUX inputs
- 1.2m cable provides flexible reach between nearby devices
- Braided cable and aluminium shell are listed by local sellers
All categories
New conditionComputer Accessories
BWOO · BO-AUX068
BWOO BO-AUX068 connects a compatible Lightning device to a 3.5mm audio input with a 1.2m cable. Check device support and connector direction; MFi status is unverified.
Approximate Market Price
BDT 400
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 400
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The BWOO BO-AUX068 is a 1.2-metre audio cable with a Lightning connector on one end and a 3.5mm male plug on the other. It is designed to send audio from a compatible Lightning-port phone or tablet to a 3.5mm auxiliary input, such as a car stereo, speaker or other audio equipment. Local listings describe a braided cable and an aluminium connector shell. It is not a 3.5mm headphone adapter with a female socket, and it does not charge the connected device.
Connect the Lightning plug to a compatible Lightning host that supports audio output, then connect the 3.5mm male plug to the receiving equipment’s 3.5mm AUX or line input. Both ends are male. It is intended for a source-to-input path; plugging the 3.5mm end into a headphone output instead of an input may not produce the expected connection. Check labels and manuals for the destination jack before connecting.
The 3.5mm end can connect to a vehicle’s AUX input when the car stereo has a matching analogue input. Select AUX as the audio source and adjust volume carefully on both the phone and stereo. Some vehicles have a 3.5mm headphone or microphone jack that is not an AUX input; physical fit alone is insufficient. If the car uses USB, Bluetooth or another input instead, this cable does not convert those interfaces.
A compatible powered speaker or amplifier with a 3.5mm line input can receive audio through the cable. Confirm whether the destination jack is an input and that its level is appropriate. The cable has no listed volume control, amplifier or power supply, so audio level is controlled by the source and receiving device. It does not provide stereo RCA, optical, USB or wireless output without additional equipment.
The host must support audio output through its Lightning port and recognize the accessory. Compatibility can depend on device model, operating-system version, accessory authentication and software. The available listings do not establish Apple MFi certification or support for every Lightning device. Check the exact device and ask the seller about certification if it is required. Newer USB-C-only devices do not have a Lightning port and cannot connect directly.
Local retailer listings identify a 1.2m cable, braided outer covering and aluminium shell. The length supports a nearby connection between a phone and an AUX jack while allowing some placement flexibility. The braid and metal shell do not establish a bend-cycle, water-resistance or impact rating. Avoid sharp bends at the connector joints, pulling on the cable or leaving it stretched across a walkway.
The BO-AUX068 carries audio from a compatible Lightning source to a 3.5mm input. Listings call it an audio converter cable, but the reviewed product information does not specify DAC chipset, sample rate, bit depth, frequency response, microphone pass-through or inline-control support. Treat it as an audio output cable for a compatible destination, not as a guaranteed headset microphone adapter or high-resolution audio interface.
Start playback at a low level, then raise volume gradually on the phone and receiving system. Avoid sudden high volume when connecting to an amplifier or car stereo. If the signal distorts, reduce the source output and check destination input settings. Unplug by holding the connector body rather than pulling the braided wire. The cable does not protect listeners from excessive volume or replace safe hearing practices.
Confirm the Lightning plug is fully seated, the phone supports Lightning audio output and the 3.5mm plug is connected to an AUX/line input. Select the correct input on the speaker or car stereo and test with another source or cable. Remove cases that prevent the Lightning connector seating fully. If the destination has only USB-C, Lightning, RCA or optical input, an appropriate separate converter is required.
Keep the connectors clean and dry. Coil the 1.2m cable loosely rather than tightly wrapping it around a phone, and store it away from sharp keys or tools that could damage the jacket. Do not use a damaged cable or connector. Support the phone and audio equipment so movement does not put sideways force on either port. The aluminium shell is not a water-protection rating.
Confirm model BO-AUX068, both male connector types, 1.2m length, included package items, warranty, return terms and Lightning compatibility with the selected seller. Headphones, speakers, car stereo and charging adapter are not confirmed as included. MFi certification and detailed audio specifications are not established by the reviewed listings. External retailer prices and availability do not verify a live BiponiBD offer.
It has a Lightning plug on one end and a 3.5mm male plug on the other.
Local retailer listings specify a length of 1.2 metres.
Connect Lightning to a compatible audio-output device and the 3.5mm plug to the car stereo’s AUX input, then select AUX.
The cable has a 3.5mm male plug, not a female headphone socket. It is intended for a 3.5mm audio input.
No charging function is specified; it is an audio cable.
MFi certification was not established by the reviewed product listings. Confirm with the seller if certification is required.
Compatibility depends on the device, OS and Lightning audio support. Verify the exact model before purchase.
No. A USB-C-only device does not have the Lightning connector required by this cable.
Microphone pass-through and inline-control support are not specified.
Retailers describe a braided cable with an aluminium shell.
Helpful answers
Product-specific answers maintained with the catalog information.
It has a Lightning plug on one end and a 3.5mm male plug on the other.
Local retailer listings specify a length of 1.2 metres.
Connect Lightning to a compatible audio-output device and the 3.5mm plug to the car stereo’s AUX input, then select AUX.
The cable has a 3.5mm male plug, not a female headphone socket. It is intended for a 3.5mm audio input.
No charging function is specified; it is an audio cable.
MFi certification was not established by the reviewed product listings. Confirm with the seller if certification is required.
Compatibility depends on the device, OS and Lightning audio support. Verify the exact model before purchase.
No. A USB-C-only device does not have the Lightning connector required by this cable.
Microphone pass-through and inline-control support are not specified.
Retailers describe a braided cable with an aluminium shell.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.