BiponiBD
All categories

All categories

DeepCool EK720-XS-1.0 High-Performance Thermal Pad, 120 × 20 × 1mm product imageNew condition

Computer Components

DeepCool EK720-XS-1.0 High-Performance Thermal Pad, 120 × 20 × 1mm

DeepCool · EK720-XS-1.0 High Performance Thermal Pad

DeepCool EK720-XS-1.0 is a gray 120 × 20 × 1mm non-conductive thermal pad rated 6.0 W/m·K by DeepCool.

Compare now

Approximate Market Price

BDT 650

Informational market estimate only; this is not a current Store offer.

Buying options
  • 120 × 20 × 1.0mm pre-formed thermal pad
  • 6.0 W/m·K conductivity per DeepCool
  • 0.8°C·cm²/W thermal impedance per DeepCool
  • Electrically non-conductive per manufacturer

Compare store prices

Buying options

0 live offers

No live offers for this variant

BDT 650

Approximate Market Price

Informational market estimate only; this is not a current Store offer.

Observed price history

Loading history…

Product story

Details worth knowing

Product overview

The DeepCool EK720-XS-1.0 is a pre-formed gray thermal pad for transferring heat from compatible integrated-circuit components to a heatsink. DeepCool lists dimensions of 120 × 20 × 1.0mm, thermal conductivity of 6.0 W/m·K, thermal impedance of 0.8°C·cm²/W, specific gravity of 3.4 ±0.2g/cc and an operating range of -40°C to +200°C. The manufacturer states that it is electrically non-conductive. Its official part number is R-EK720-GYXS10-G-1.

Pad versus thermal paste

Unlike syringe thermal paste, EK720 is a pre-cut pad with a defined 1.0mm thickness. It fills a designed gap between a chip and heatsink and can be easier to handle where a pad is specified. It should not be substituted for paste merely because both transfer heat. Pad thickness is critical: an incorrect thickness can prevent a cooler from contacting the processor correctly or can put pressure on nearby components. Follow the device service manual.

Size and thickness

The XS-1.0 variant is listed at 120mm × 20mm × 1.0mm. DeepCool offers EK720 pads in multiple thicknesses and sizes, so verify the full suffix before purchase. Measure the target area and check the manufacturer’s required thickness for that device. If a larger pad must be trimmed, use clean tools and avoid leaving debris. This product is not the XL or other thickness variant.

Thermal conductivity and impedance

DeepCool specifies 6.0 W/m·K conductivity and thermal impedance of 0.8°C·cm²/W. These are manufacturer-published thermal-interface ratings. They do not guarantee a particular component temperature or make a mismatched pad safe to install. Contact pressure, gap size, surface condition, heatsink design, airflow and operating load all affect heat transfer. Use the rating as a specification, not a promise of a fixed temperature drop.

Electrical and material safety

DeepCool states that EK720 is electrically non-conductive and designed for use around sensitive circuit boards. This reduces electrical-conduction concerns if a pad touches nearby circuitry, but do not treat it as a general insulator or place it over contacts, vents or connectors. The public specification describes the pad as gray and pliable; it does not provide a full chemical composition or safety data sheet in the reviewed page. Keep it away from children and pets.

Where it can be used

DeepCool describes EK720 for integrated-circuit chips and mentions applications in laptops, graphics cards, game consoles and other electronics. Actual fit depends on each device’s thermal design and specified gap. Different chips in the same GPU or laptop can use different pad thicknesses. Do not remove a device’s existing pad or disassemble sealed equipment without checking service instructions and warranty requirements.

Cutting and installation

Power down and disconnect the equipment before servicing. Remove old pad material carefully and clean the contact surfaces according to the device maker’s instructions. Cut the new pad to cover the designated contact area without overlapping nearby components. Remove protective films if present, place it flat without folds, and remount the heatsink evenly. Confirm both sides’ liners are removed when applicable; package-specific liner details are not stated in all listings.

Operating temperature and storage

DeepCool lists an operating range from -40°C to +200°C. This is a material specification, not the safe operating range of the computer or chip. Store the pad flat and clean, protected from dust, crushing and contamination. Avoid stretching, folding or stacking it in a way that changes its thickness. Inspect for tears, residue or damage before installation and do not reuse a pad that has been crushed or contaminated unless the device maker permits it.

Confirmed model details and package

The official product page identifies the EK720-XS-1.0 model, 120 × 20 × 1.0mm size, gray color, thermal metrics, EAN 6933412700210 and part number R-EK720-GYXS10-G-1. Retailer warranty and package descriptions vary; confirm the exact number of sheets/pads and seller coverage with the selected BiponiBD seller. This is a thermal pad, not a tube of thermal paste, and it does not include a heatsink or cooling fan.

Buying and compatibility checks

Before ordering, compare the target device’s required pad thickness and dimensions with 120 × 20 × 1.0mm. Confirm the exact DeepCool EK720-XS-1.0 suffix, package contents, authenticity, seller warranty and return terms. Some local sellers list one-year replacement coverage, while others list no warranty or short replacement periods; those terms do not establish the BiponiBD offer. Keep the original device pad as a reference where safe and ask a qualified technician if thickness is uncertain.

Key features

  • 120 × 20 × 1.0mm pre-formed thermal pad
  • 6.0 W/m·K conductivity per DeepCool
  • 0.8°C·cm²/W thermal impedance per DeepCool
  • Electrically non-conductive per manufacturer
  • Gray pliable thermal interface material
  • For compatible IC-to-heatsink interfaces
  • Operating range -40°C to +200°C per DeepCool

Advantages

  • Pre-formed sheet avoids applying paste for pad-specified gaps
  • Manufacturer provides precise dimensions and thermal specifications
  • Non-conductive formulation per manufacturer

Limitations

  • Exact 1.0mm thickness must match the device design
  • Incorrect thickness can impair heatsink contact or create pressure
  • Package count and seller warranty need confirmation

Frequently asked questions

What are the dimensions of EK720-XS-1.0?

DeepCool lists 120 × 20 × 1.0mm.

What is the thermal conductivity?

The official DeepCool specification is 6.0 W/m·K.

Is the pad electrically conductive?

DeepCool states that EK720 is electrically non-conductive.

What is the thermal impedance?

DeepCool lists 0.8°C·cm²/W.

What color is it?

DeepCool lists gray.

Can I use it instead of thermal paste?

Only if the device design specifies a pad and a 1.0mm gap; pads and paste are not interchangeable by default.

Can it be used in a graphics card?

DeepCool identifies graphics cards as a possible application, but use only the thickness specified for your exact card model.

Can I cut the pad?

It may be trimmed to fit where the device design allows; cut cleanly and avoid contaminating the pad or components.

Does it include a heatsink?

No heatsink is listed; this product is a thermal pad only.

What warranty is included?

Local retailer coverage varies. Confirm written warranty and package contents with the selected BiponiBD seller.

Source basis: DeepCool official EK720-XS-1.0 specification plus Ryans, Techland BD and Geary BD exact-model listings. Package count and warranty terms differ by seller.

Features

  • 120 × 20 × 1.0mm pre-formed thermal pad
  • 6.0 W/m·K conductivity per DeepCool
  • 0.8°C·cm²/W thermal impedance per DeepCool
  • Electrically non-conductive per manufacturer
  • Gray pliable thermal interface material
  • For compatible IC-to-heatsink interfaces
  • Operating range -40°C to +200°C per DeepCool

Pros

  • Pre-formed sheet avoids applying paste for pad-specified gaps
  • Manufacturer provides precise dimensions and thermal specifications
  • Non-conductive formulation per manufacturer

Cons

  • Exact 1.0mm thickness must match the device design
  • Incorrect thickness can impair heatsink contact or create pressure
  • Package count and seller warranty need confirmation

Helpful answers

Frequently asked questions

Product-specific answers maintained with the catalog information.

What are the dimensions of EK720-XS-1.0?

DeepCool lists 120 × 20 × 1.0mm.

What is the thermal conductivity?

The official DeepCool specification is 6.0 W/m·K.

Is the pad electrically conductive?

DeepCool states that EK720 is electrically non-conductive.

What is the thermal impedance?

DeepCool lists 0.8°C·cm²/W.

What color is it?

DeepCool lists gray.

Can I use it instead of thermal paste?

Only if the device design specifies a pad and a 1.0mm gap; pads and paste are not interchangeable by default.

Can it be used in a graphics card?

DeepCool identifies graphics cards as a possible application, but use only the thickness specified for your exact card model.

Can I cut the pad?

It may be trimmed to fit where the device design allows; cut cleanly and avoid contaminating the pad or components.

Does it include a heatsink?

No heatsink is listed; this product is a thermal pad only.

What warranty is included?

Local retailer coverage varies. Confirm written warranty and package contents with the selected BiponiBD seller.

Customer community

Reviews & product Q&A

No ratings yet

Choose your own rating. BiponiBD never adds a default rating or review.

Be the first customer to review an available Store offer.
Back to all products

Become a merchant

Put your store in front of ready buyers.

Join BiponiBD, publish accurate offers and start free.

Start free