Pros
- Official specification includes net and gross quantity
- Compact thermal paste package for maintenance
- Manufacturer publishes key material properties
All categories
New conditionComputer Accessories
DeepCool · Z3
DeepCool Z3 is a 1.5g silver-gray thermal paste for the chip-to-cooler interface; manufacturer and retailer specifications differ on some ratings.
Approximate Market Price
BDT 500
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 500
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
DeepCool Z3 is a silver-gray thermal interface paste intended to help transfer heat between a processor package and a cooler contact plate. DeepCool lists a 1.5g net quantity, 73cps viscosity, thermal impedance below 0.201°C-in²/W and thermal conductivity above 3.5 W/m·K. TechLand also lists Z3 for CPU/GPU cooling, but its conductivity and temperature figures differ from the manufacturer page. Check the current package specification and follow the processor and cooler installation guidance.
A thermal interface material fills microscopic gaps between two surfaces so heat can move more effectively from a chip into its cooler. It complements the heatsink or liquid-cooling system; it does not replace a properly mounted cooler, airflow or correct fan operation. DeepCool describes Z3 as thermal paste for cooling applications. Temperatures depend on the complete system, mounting pressure, workload, room conditions and the condition of the cooler.
DeepCool lists a net paste weight of 1.5g and a gross weight of 6.5g. Net weight refers to the paste, while gross weight includes packaging. This is a small application quantity intended for use on a contact interface, not a bulk tub. Check the delivered label and package contents if the exact quantity is important. The reviewed sources do not confirm an applicator or other included tools.
The manufacturer’s product page states thermal conductivity greater than 3.5 W/m·K. TechLand’s listing states greater than 1.134 W/m·K. The two published values conflict, so the manufacturer figure is identified as the official specification and the discrepancy is disclosed rather than silently combined. Conductivity figures are laboratory-style material ratings and do not predict a guaranteed processor temperature in a particular computer.
DeepCool lists an operating temperature range of −50°C to 220°C, thermal impedance below 0.201°C-in²/W, dielectric constant A above 5.1, viscosity of 73cps and silver-gray color. TechLand gives a different upper temperature value of 300°C. Use the product tube or the current manufacturer documentation for batch-specific details. These material specifications do not define safe operating temperatures for the CPU or GPU itself.
The thermal paste can be used at a compatible cooler-to-chip interface when the hardware manufacturer’s service instructions allow it. TechLand describes the Z3 for heat transfer from CPU/GPU to cooler. Graphics cards often have warranty-sensitive disassembly and may use pads or other interface materials on components beyond the GPU die. Do not replace thermal pads or open a device unless the service procedure supports it.
Before application, power down and disconnect the equipment, allow hot components to cool, and remove the cooler according to its manual. Clean away old paste from the mating surfaces using a suitable cleaning method that is safe for the hardware. Avoid scratching the chip or cooler base, and allow the surfaces to dry before applying new material. If the equipment is under warranty, review service conditions before disassembly.
Use the amount and application approach recommended by the processor or cooler manufacturer. DeepCool’s specification page lists material properties but does not give a universal dot size or spreading pattern for every CPU and cooler. Too much or too little material, uneven cooler pressure or a misaligned mount can impair contact. Tighten the cooler as directed and do not infer an application method from conductivity alone.
Thermal paste is one part of the heat-transfer path. A fresh application may address dried or disturbed interface material, but it cannot correct a clogged heatsink, failed fan, poor case airflow, excessive voltage or incorrect cooler mounting. No fixed temperature drop or overclocking result is guaranteed by the published specifications. Compare system temperatures under similar workloads and ambient conditions when diagnosing a cooling change.
The DeepCool specification page reviewed here does not list an electrical conductivity value, so this description makes no electrical-safety claim. Apply only to the intended contact surface and keep the product away from connectors and unrelated components. Avoid ingestion or contact with eyes and wash hands after handling; consult the package safety information for the manufacturer’s specific precautions. Store the tube closed and follow its label directions.
Published thermal conductivity and maximum temperature differ between DeepCool and a Bangladesh retailer. Verify the current package, net quantity, seller warranty and accessories. The product is a small 1.5g paste package, and exact system results depend on the cooling assembly and installation. Confirm compatibility with the cooler service procedure, especially for laptops and graphics cards, before removing a heatsink.
TechLand’s checked page displayed its own price and stock, which can change and does not establish a BiponiBD offer. Local warranty language can vary; ask the selected merchant who handles a claim, for how long and under which conditions. Choose Z3 if the documented quantity and material properties fit the intended maintenance task, and use the seller’s current listing for live availability and package contents.
It is thermal interface material placed between a processor or GPU and a cooler contact surface to help transfer heat across the interface. Follow the cooler and processor instructions for preparation and application.
DeepCool specifies a net weight of 1.5g and gross weight of 6.5g. Retailer page packaging information may show the same 1.5g item; check the selected package before purchase.
DeepCool’s product specification states greater than 3.5 W/m·K. TechLand lists greater than 1.134 W/m·K, so published values conflict. The manufacturer figure is recorded here with the discrepancy disclosed.
DeepCool lists −50°C to 220°C. TechLand shows −50°C to 300°C. Since the listing values differ, consult the tube or current official documentation for the exact batch specification.
DeepCool identifies the Z3 paste as silver gray.
The manufacturer lists 73 cps. Viscosity describes flow behavior and does not establish a best application method for every cooler.
The checked manufacturer specification page does not state electrical conductivity. Do not assume this property; apply carefully and follow product packaging guidance.
It is sold as thermal paste for cooling hardware; TechLand describes CPU/GPU heat transfer use. For a graphics card, check the device warranty and service guidance before removing its cooler.
Clean old residue from both contact surfaces using a suitable method, then apply according to the cooler or processor maker’s instructions. The reviewed DeepCool specification page does not prescribe one universal amount or spread pattern.
The checked DeepCool page lists weight and technical specifications but does not confirm an applicator or other accessories. Verify package contents with the seller.
Warranty terms are seller and package specific; the checked sources do not establish a universal Bangladesh warranty. Confirm the seller’s written terms before buying.
Local seller prices and stock change. Check the current BiponiBD offer and merchant listing; the price shown on a third-party page is not a guaranteed BiponiBD price.
Helpful answers
Product-specific answers maintained with the catalog information.
It is thermal interface material placed between a processor or GPU and a cooler contact surface to help transfer heat across the interface. Follow the cooler and processor instructions for preparation and application.
DeepCool specifies a net weight of 1.5g and gross weight of 6.5g. Retailer page packaging information may show the same 1.5g item; check the selected package before purchase.
DeepCool’s product specification states greater than 3.5 W/m·K. TechLand lists greater than 1.134 W/m·K, so published values conflict. The manufacturer figure is recorded here with the discrepancy disclosed.
DeepCool lists −50°C to 220°C. TechLand shows −50°C to 300°C. Since the listing values differ, consult the tube or current official documentation for the exact batch specification.
DeepCool identifies the Z3 paste as silver gray.
The manufacturer lists 73 cps. Viscosity describes flow behavior and does not establish a best application method for every cooler.
The checked manufacturer specification page does not state electrical conductivity. Do not assume this property; apply carefully and follow product packaging guidance.
It is sold as thermal paste for cooling hardware; TechLand describes CPU/GPU heat transfer use. For a graphics card, check the device warranty and service guidance before removing its cooler.
Clean old residue from both contact surfaces using a suitable method, then apply according to the cooler or processor maker’s instructions. The reviewed DeepCool specification page does not prescribe one universal amount or spread pattern.
The checked DeepCool page lists weight and technical specifications but does not confirm an applicator or other accessories. Verify package contents with the seller.
Warranty terms are seller and package specific; the checked sources do not establish a universal Bangladesh warranty. Confirm the seller’s written terms before buying.
Local seller prices and stock change. Check the current BiponiBD offer and merchant listing; the price shown on a third-party page is not a guaranteed BiponiBD price.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.