BiponiBD
All categories

All categories

DeepCool Z5 High-Performance Thermal Paste, 3g product imageNew condition

Computer Components

DeepCool Z5 High-Performance Thermal Paste, 3g

DeepCool · Z5 Thermal Paste

DeepCool Z5 is a 3g silver-gray thermal compound rated above 3.5 W/m·K and electrically non-conductive by the manufacturer.

Compare now

Approximate Market Price

BDT 650

Informational market estimate only; this is not a current Store offer.

Buying options
  • 3.0g net compound weight; 7g gross weight listed by DeepCool
  • Thermal conductivity greater than 3.5 W/m·K per manufacturer
  • Thermal impedance below 0.159°C·in²/W per manufacturer
  • Electrically non-conductive per DeepCool

Compare store prices

Buying options

0 live offers

No live offers for this variant

BDT 650

Approximate Market Price

Informational market estimate only; this is not a current Store offer.

Observed price history

Loading history…

Product story

Details worth knowing

Product overview

DeepCool Z5 is a silver-gray thermal compound for improving heat transfer between a processor and its cooler. DeepCool specifies a 3.0g net weight, thermal conductivity above 3.5 W/m·K, thermal impedance below 0.159°C·in²/W, viscosity of 76cps and an operating temperature range of -50°C to 220°C. The manufacturer describes it as electrically non-conductive and recommends it with high-performance CPU coolers. Use it only at a compatible cooler interface and follow the hardware installation guide.

What thermal paste does

A thermal interface compound fills microscopic gaps between the processor heat spreader and the cooler base, helping reduce trapped air and transfer heat to the heatsink. Z5 does not replace a cooler, fan or radiator, and its published conductivity rating alone does not predict a specific CPU temperature. Results depend on cooler quality, mounting pressure, airflow, chip power, surface condition, application amount and ambient temperature. Compare complete system conditions when evaluating cooling results.

Thermal performance specifications

DeepCool’s product page lists conductivity greater than 3.5 W/m·K and thermal impedance below 0.159°C·in²/W, alongside viscosity of 76cps. These are manufacturer specifications. A few local listings instead state conductivity around 1.46 W/m·K, which conflicts with the official DeepCool page; this catalog entry follows the manufacturer’s current product specification and records the regional listing mismatch for transparency. Measurement methods may differ between brands, so these figures are not a direct ranking of real-world cooling.

Electrically non-conductive formulation

DeepCool states that Z5 is electrically non-conductive and designed to prevent electrical damage caused by the paste. Still apply carefully: avoid contaminating socket contacts, pins, connectors or circuit-board surfaces, and do not use paste as an electrical insulator or sealant. “Non-conductive” does not remove the need to power down and disconnect equipment before cooler installation. Use the product only for its intended thermal-interface application.

3g net weight and tube size

The official specification lists 3.0g net weight and 7g gross package weight. A retailer may report a different tube or package mass; distinguish compound net weight from the total packaging. The number of applications depends on chip size and how much compound is applied each time, and DeepCool does not promise a fixed count. Check that the syringe/tube is sealed and that the label identifies Z5 and part number DP-TIM-Z5-2.

Color, temperature range and viscosity

DeepCool identifies the color as silver gray, the operating-temperature range as -50°C to 220°C, and viscosity as 76cps. These are datasheet values, not instructions to expose a computer to those temperatures. Actual component operating limits are set by the processor, cooler and system. The manufacturer states that the density is compatible with most polished cooler surfaces; follow the cooler maker’s preparation and mounting instructions.

Where and when to apply

Use Z5 on a compatible CPU cooler interface when installing or reseating a heatsink. Some graphics cards and other components also use thermal compounds, but disassembly can affect warranty and requires model-specific knowledge; follow the device maker’s service instructions. If the cooler already has factory-applied compound, do not add another layer unless instructed. Confirm cooler contact surface, hardware compatibility and maintenance procedure before opening a device.

Application and cleanup

Shut down and disconnect the computer before service. Remove old compound from both mating surfaces using an appropriate lint-free material and electronics-safe cleaner as recommended by the hardware maker. Apply a small amount using DeepCool’s method and mount the cooler evenly. Avoid scraping with metal tools, touching socket pins or spreading excess paste beyond the contact area. If you are unsure, use a qualified technician rather than forcing a cooler or processor installation.

Storage and safe handling

Keep the tube capped and store it according to the package instructions. Keep it away from children, food, eyes and open electrical equipment. Do not ingest the compound. Avoid contamination from dust or used paste and do not reuse residue removed from a processor. Check the tube for leakage, dried material or damaged packaging before use. Dispose of wipes and leftover product according to local guidance.

Warranty and buying checks

DeepCool’s specification page identifies part number DP-TIM-Z5-2, EAN 6933412700043 and one tube product. Local sellers may use different warranty or return policies; confirm the selected BiponiBD seller’s written coverage, authenticity, seal condition, delivery and return terms. Verify the 3g net quantity and Z5 marking, since Z3 and Z5 are different products. Current seller stock and offer pricing can change independently of manufacturer specifications.

Key features

  • 3.0g net compound weight; 7g gross weight listed by DeepCool
  • Thermal conductivity greater than 3.5 W/m·K per manufacturer
  • Thermal impedance below 0.159°C·in²/W per manufacturer
  • Electrically non-conductive per DeepCool
  • Viscosity 76cps per manufacturer
  • Operating temperature -50°C to 220°C per manufacturer
  • Silver-gray compound; part number DP-TIM-Z5-2

Advantages

  • Non-conductive formulation described by the manufacturer
  • Official specifications include conductivity, viscosity and impedance figures
  • Compact 3g tube for compatible thermal-interface servicing

Limitations

  • Application requires safe cooler removal and correct remounting
  • Results depend on cooler, mounting, airflow and application method
  • Regional retailer conductivity entries conflict with the manufacturer specification

Frequently asked questions

What is DeepCool Z5 used for?

It is thermal compound for the contact interface between a compatible CPU and cooler, helping transfer heat.

How much Z5 is in the tube?

DeepCool lists 3.0g net weight and 7g gross package weight.

What is its thermal conductivity?

DeepCool specifies greater than 3.5 W/m·K; some local listings show a lower conflicting number.

Is DeepCool Z5 electrically conductive?

DeepCool describes Z5 as electrically non-conductive. Apply carefully and keep it away from contacts and sockets.

What is its thermal impedance?

The manufacturer lists below 0.159°C·in²/W.

What is the operating-temperature range?

DeepCool lists -50°C to 220°C; this does not change the operating limits of the computer components.

What color is it?

The official specification lists silver gray.

How many applications does a 3g tube provide?

It depends on processor size and application amount; DeepCool does not specify a fixed application count.

Can I use it on a GPU?

Thermal compounds are used at compatible cooler interfaces, but check the GPU maker’s service instructions and warranty before disassembly.

What warranty comes with it?

Warranty terms depend on the seller; confirm the selected BiponiBD seller’s written coverage and return policy.

Source basis: DeepCool Z5 official specifications and Ryans, Techland BD and CSI BD listings. Some local retailer conductivity values conflict with DeepCool’s official >3.5 W/m·K specification.

Features

  • 3.0g net compound weight; 7g gross weight listed by DeepCool
  • Thermal conductivity greater than 3.5 W/m·K per manufacturer
  • Thermal impedance below 0.159°C·in²/W per manufacturer
  • Electrically non-conductive per DeepCool
  • Viscosity 76cps per manufacturer
  • Operating temperature -50°C to 220°C per manufacturer
  • Silver-gray compound; part number DP-TIM-Z5-2

Pros

  • Non-conductive formulation described by the manufacturer
  • Official specifications include conductivity, viscosity and impedance figures
  • Compact 3g tube for compatible thermal-interface servicing

Cons

  • Application requires safe cooler removal and correct remounting
  • Results depend on cooler, mounting, airflow and application method
  • Regional retailer conductivity entries conflict with the manufacturer specification

Helpful answers

Frequently asked questions

Product-specific answers maintained with the catalog information.

What is DeepCool Z5 used for?

It is thermal compound for the contact interface between a compatible CPU and cooler, helping transfer heat.

How much Z5 is in the tube?

DeepCool lists 3.0g net weight and 7g gross package weight.

What is its thermal conductivity?

DeepCool specifies greater than 3.5 W/m·K; some local listings show a lower conflicting number.

Is DeepCool Z5 electrically conductive?

DeepCool describes Z5 as electrically non-conductive. Apply carefully and keep it away from contacts and sockets.

What is its thermal impedance?

The manufacturer lists below 0.159°C·in²/W.

What is the operating-temperature range?

DeepCool lists -50°C to 220°C; this does not change the operating limits of the computer components.

What color is it?

The official specification lists silver gray.

How many applications does a 3g tube provide?

It depends on processor size and application amount; DeepCool does not specify a fixed application count.

Can I use it on a GPU?

Thermal compounds are used at compatible cooler interfaces, but check the GPU maker’s service instructions and warranty before disassembly.

What warranty comes with it?

Warranty terms depend on the seller; confirm the selected BiponiBD seller’s written coverage and return policy.

Customer community

Reviews & product Q&A

No ratings yet

Choose your own rating. BiponiBD never adds a default rating or review.

Be the first customer to review an available Store offer.
Back to all products

Become a merchant

Put your store in front of ready buyers.

Join BiponiBD, publish accurate offers and start free.

Start free