DTECH DT-7018 3-in-1 HDMI switch
The DTECH DT-7018 connects as many as three HDMI source devices to one display. Select one input to send to a television, monitor or projector when the display has fewer HDMI ports than the devices you use. It is a switch, not a splitter or matrix: it sends one selected source to one output and does not duplicate a picture across several screens.
HDMI 1.4b, Full HD and 3D
DTECH lists HDMI 1.4b support, resolutions up to 1080p, and 3D video. The manufacturer also specifies a 250 MHz bandwidth, 2.5 Gbps per channel (7.5 Gbps across three channels) and 12-bit deep colour per channel. These are manufacturer-listed limits, not a promise that every source, cable and display combination will deliver the same result. The product page does not establish 4K support, so choose a model explicitly rated for 4K if that is required.
Content protection and sound
The manufacturer lists HDCP pass-through. It also lists uncompressed LPCM and compressed formats including DTS Digital and Dolby Digital, with DTS-HD and Dolby TrueHD named in its specification. Playback still depends on the source device, display or receiver, content-protection version, audio settings and the cables in the signal chain. Confirm the format needed for your specific setup before purchase.
Source selection and remote control
DTECH describes both intelligent and mechanical switching and lists an IR remote controller with an IR extender receiver. The remote can help select an input when the switch is not easy to reach. The listing does not explain the exact auto-detection behavior or the extender's installation range; confirm how switching works for the unit being sold if automatic selection is important.
Connection guide
- Connect up to three HDMI source devices to the switch's input ports using suitable HDMI cables.
- Connect the switch's single HDMI output to the display or projector.
- Select the matching display input and choose the desired source using the switch controls or included IR remote.
- If the image or sound is missing, reseat both ends of each cable and check that the source and display are set to a supported format.
Use cables of suitable length and rating for your resolution and installation. DTECH's product page does not state that HDMI cables or a separate power adapter are included, so check the seller's package list before ordering.
Key specifications
- Brand and model: DTECH DT-7018
- Device: 3-input, 1-output HDMI switch
- Finish: grey (manufacturer and Bangladesh seller listings)
- HDMI standard: 1.4b
- Maximum listed resolution: 1080p
- 3D video: supported by manufacturer listing
- Bandwidth: 250 MHz; 2.5 Gbps per channel / 7.5 Gbps total, manufacturer-listed
- Deep colour: 12-bit per channel, manufacturer-listed
- HDCP: pass-through listed
- Audio: LPCM, DTS Digital and Dolby Digital; DTS-HD and Dolby TrueHD named by manufacturer
- Switching: intelligent or mechanical modes listed; confirm exact behavior
- Controls/accessory: IR remote and IR extender receiver listed by manufacturer
- 4K support, cable contents, power requirements, dimensions and weight: not stated in the cited manufacturer specification
Bangladesh price and warranty check
At the time checked, Star Tech listed the DT-7018 at BDT 950 and In Stock, while Tech Land BD listed the grey switch at BDT 1,150 and In Stock. These are seller listings, not BiponiBD Store offers; the amount, stock and delivery conditions can change. Both retailers display a one-year warranty, but confirm the exact seller's written coverage, claim process and package contents before ordering.
Before you buy
Count the HDMI inputs and outputs you need, confirm that 1080p/3D meets your display requirements, and check audio and HDCP compatibility across every device. Confirm whether the package includes the cables or power components your setup requires. If you need one source on multiple displays, look for a splitter; if you need 4K or higher refresh-rate support, verify those exact specifications on the alternative product.