Pros
- Duplicates one VGA source on two compatible displays
- Metal housing and 250 MHz video bandwidth
All categories
New conditionComputer Accessories
Dtech · DT-7252
Dtech DT-7252 powered 1-to-2 VGA splitter for duplicating one analog video signal to two compatible displays; 250 MHz bandwidth.
Approximate Market Price
BDT 1,100
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Compare store prices
No live offers for this variant
BDT 1,100
Approximate Market Price
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Loading history…
Product story
The Dtech DT-7252 distributes one analog VGA video signal to two compatible displays. It can be useful when the same presentation or computer image needs to appear on a monitor and a projector, or on two monitors. The splitter duplicates the source image; it does not provide two independent extended desktops or convert VGA to HDMI.
Dtech specifies a 250 MHz video bandwidth, 75-ohm input and output impedance and VGA resolution up to 1920 × 1440 at 60 Hz. It lists VGA, SVGA, XGA, SXGA, WXGA and UXGA signal formats. The usable resolution and refresh rate depend on the source, both displays, cables and their shared supported modes. Picture quality can be affected by cable quality, length and interference.
Connect the VGA output of the source to the splitter input and connect each VGA display to an output using appropriate cables. The manufacturer says the splitter supports USB and AC power; confirm the correct power method, adapter rating and included accessories for the seller’s package before use. Turn devices off when connecting them, secure the VGA connectors and select the correct input on each display. VGA carries video; arrange audio separately if required.
Dtech specifies an input cable up to 10 m and output cables under 25 m when using the stated AWG24 standard 3+6 VGA cable. These are manufacturer conditions, not a guarantee for every cable or installation. Start with short, good-quality cables and test the complete setup. The manufacturer also describes a metal enclosure and support for up to three cascade levels per output; confirm the installation requirements before cascading units.
Check that your source and displays provide compatible VGA connections, that the required cables and power supply are included or available separately, and that both screens support the chosen signal mode. The DT-7252 shares one video source rather than switching between multiple inputs. Confirm product authenticity, package contents and local warranty with the seller before purchase.
Helpful answers
Product-specific answers maintained with the catalog information.
No. It distributes the same VGA signal to both outputs. Independent extended desktops require suitable separate video outputs or another appropriate solution.
Dtech states that the splitter supports USB and AC power. Confirm the required power source and what is included with the seller.
No. This is a VGA video splitter. HDMI conversion and audio require separate compatible equipment.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.