Pros
- Bidirectional conversion between compatible RS232 and RS485 interfaces
- Data indicator helps show communication activity
- Manufacturer lists rates from 300 bps to 115.2 kbps
All categories
New conditionComputer Accessories
Dtech · DT-9004
Dtech DT-9004 passive bidirectional RS232-to-RS485 serial converter, rated for 300 bps–115.2 kbps; non-isolated design.
Approximate Market Price
BDT 1,050
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Compare store prices
No live offers for this variant
BDT 1,050
Approximate Market Price
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Loading history…
Product story
The Dtech DT-9004 is an industrial serial interface converter intended to connect compatible RS232 and RS485 equipment. Dtech describes bidirectional data transmission between the two interfaces and a passive design with a data indicator. It is a serial communication accessory, not a video or VGA converter.
Dtech lists a transmission rate of 300 bps to 115.2 kbps. Its published distance limits are less than 1,200 metres on the RS485 side and within 15 metres on the RS232 side. These are manufacturer limits rather than a guarantee for every installation: cable quality, baud rate, wiring, termination and electrical conditions affect performance.
The manufacturer identifies this model as non-photoelectrically isolated and describes a built-in TVS protection component. Do not assume galvanic isolation or unlimited surge protection. Where isolation or a particular protection rating is required, verify the equipment specification and choose an appropriately rated solution.
Before connecting equipment, check the serial interfaces, connector and terminal pinout, power requirements, baud rate and communication settings against the manufacturer documentation for both devices. Use suitable cabling and follow the installation instructions. The indicator can help show data activity, but does not prove that the application protocol or wiring is correct.
Dtech lists an operating range of -20°C to 70°C and relative humidity of 5%–95%. Verify the environmental conditions and any condensation restrictions for your installation. Confirm the DT-9004 model, included accessories, warranty and return terms with the seller. The manufacturer and reference retailer list one year, but individual seller terms may vary.
Helpful answers
Product-specific answers maintained with the catalog information.
Dtech describes the converter as non-photoelectrically isolated. Verify isolation requirements before selecting it.
The manufacturer lists 300 bps to 115.2 kbps. Configure compatible settings on the connected equipment.
Dtech lists less than 1,200 m on the RS485 end and within 15 m on the RS232 end. Actual performance depends on installation conditions.
No. The DT-9004 converts between RS232 and RS485 serial interfaces; it is not a video converter.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.