Pros
- Short one-meter lead for nearby charging setups
- Braided jacket is described by local retailers
- Retailers provide specific voltage, current and output figures
All categories
New conditionComputer Accessories
Fantech · DuraLink DL4AL 1m Lightning Cable
Fantech DL4AL is a 1m USB-A to Lightning cable listed at 5V/2.4A, 12W and 480Mbps with braided nylon and aluminum shell. Verify MFi and warranty.
Approximate Market Price
BDT 410
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 410
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Fantech DuraLink DL4AL is a one-meter USB Type-A to Lightning cable in the DL4 Series. Bangladesh retailers list 5V, 2.4A and maximum output of 12W, with a braided nylon jacket and aluminum shell. WebDokan lists up to 480Mbps data transfer. These are retailer-published specifications; the reviewed product sources did not verify Apple MFi certification or the precise iPhone and iPad model list. Check device and charger requirements before ordering.
The cable connects a compatible USB-A charger or host port to a Lightning port on a compatible Apple device. It is not USB-C to Lightning, and a USB-C-only adapter will require a different cable or an appropriate adapter not confirmed as included. Check the connector on your power source and the port on your iPhone, iPad or accessory. The connector shape does not by itself establish MFi certification or support for every iOS version.
Retailers list a one-meter length. This short cable can suit a desk, bedside or travel setup near a USB-A charging source. Leave slack so the cable is not stretched, and avoid tight bends at the Lightning and USB-A ends. Keep it away from sharp edges, moving furniture, excessive heat and moisture. The braided nylon construction can help resist everyday tangling, but it does not make the cable indestructible or waterproof.
Product listings specify 5V and 2.4A, with maximum output of 12W. Actual charging power depends on the adapter, device, cable condition and supported charging negotiation. These figures do not establish USB Power Delivery or guarantee a particular Apple fast-charge mode. Use a compatible USB-A power adapter within the device’s rated limits. Stop using the cable if it or the connector becomes unusually hot or damaged.
The reviewed pages describe Lightning-device compatibility, but no verified MFi certification evidence was found for this exact DL4AL item. Do not treat a Lightning connector or “fast charging” phrase as proof of certification. Check the package, product documentation or Fantech support for current certification and supported device models. If an iPhone shows an accessory warning or charging becomes intermittent, disconnect the cable and consult the manufacturer or seller.
WebDokan lists up to 480Mbps data transfer for the DL4AL. This is a reseller-published claim and was not confirmed in a manufacturer datasheet during this review. Actual transfer rate depends on the host port, device, operating system and workload. If dependable sync or backup performance is important, verify the cable’s data capability with Fantech and test it with the intended computer and Apple device. Do not infer a particular USB data generation from the Lightning connector.
Star Tech and other retailer listings describe a braided nylon outer jacket and an aluminum connector shell. The sources do not consistently provide conductor gauge, shielding, connector plating, strain-relief test results or flex-cycle rating. Keep the contacts clean and dry, insert the connectors gently and disconnect by gripping the plug rather than pulling the wire. Inspect the jacket and connector housing periodically for fraying or damage.
Connect the USB-A end to a compatible power adapter or computer, then connect the Lightning end to a supported device. For charging, use a suitable adapter that matches the device’s requirements. For syncing, the computer, OS and cable must all support data; the reseller-reported 480Mbps rate should be verified if it matters. Some iPad models use USB-C rather than Lightning and need a different cable. Check the port on the exact device model.
If the device does not charge, reseat both plugs, test a compatible outlet and adapter, and inspect the connector for debris without inserting metal tools. If the cable is not recognized, test a known-supported cable and check the computer port and device trust settings. An accessory warning can relate to certification or compatibility; stop using the cable if the device reports an issue or the connector heats up. Contact the seller or Fantech for model-specific support.
Current warranty terms depend on the seller and exact offer. Confirm the coverage period, service location and claim requirements before purchase. Other stores’ prices and stock do not verify the live BiponiBD offer. Check package markings for DL4AL, USB-A to Lightning, 1m and 12W, and verify connector and cable condition when delivered. Keep the receipt and packaging in case a claim is needed.
DL4AL provides a short USB-A-to-Lightning connection with retailer-listed 5V/2.4A and 12W ratings, braided nylon construction and an aluminum shell. A reseller also lists 480Mbps data transfer. MFi certification, a specific fast-charge protocol and exact device compatibility were not verified. Confirm certification and the charging/data requirements of the intended Apple device before relying on those functions.
Fantech DuraLink DL4AL is a 1m USB-A-to-Lightning cable. Retailers list 5V/2.4A, 12W, braided nylon and an aluminum shell; WebDokan lists 480Mbps. MFi status and specific Apple fast-charge compatibility were not verified. Use a compatible USB-A source, check the exact device port and confirm current warranty with the seller.
Helpful answers
Product-specific answers maintained with the catalog information.
The model is Fantech DuraLink DL4AL.
It connects USB Type-A to Lightning.
Retailers specify 1 meter.
Listings specify 5V at 2.4A, for up to 12W; actual charging depends on device and adapter.
MFi certification was not verified in the reviewed sources; check the product documentation.
A specific Apple fast-charge protocol was not verified.
WebDokan lists up to 480Mbps; this reseller claim was not confirmed by a manufacturer datasheet.
Retailers describe braided nylon and an aluminum connector shell.
The cable’s source end is USB-A; a USB-C-only charger needs a different cable or suitable adapter.
Confirm current coverage and claim terms with the selected seller.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.