Pros
- One-meter length suits nearby charging setups
- Lightning connector for compatible Apple devices
- Retailers publish voltage/current and cable material details
All categories
New conditionComputer Accessories
Fantech · VibeLINK VL2AL 1m Lightning Cable
Fantech VL2AL is a 1m USB-A to Lightning cable with silicone and TPE construction listed, rated 5V/2.4A. Verify MFi status and device compatibility.
Approximate Market Price
BDT 400
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 400
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Fantech VibeLINK VL2AL is a one-meter USB Type-A to Lightning cable in the VL2 VibeLINK series. Bangladesh retailers list a silicone cable with TPE construction and a rated current of 2.4A at 5V. It is intended for compatible Lightning devices and USB-A charging ports. The listing does not establish Apple MFi certification, a specific fast-charge protocol, data transfer rate or device-by-device compatibility, so confirm those requirements before relying on the cable.
The cable connects a USB-A port or charger to a compatible Lightning connector on an Apple device. Check the port type on the charger: a USB-C-only power adapter will require a different cable or adapter, which is not confirmed included. Connect the plugs without force and keep the port free from dust. A physical Lightning plug does not by itself prove certification, data support or compatibility with every iPhone, iPad or accessory.
Retailers list a 1m length. This provides a short connection for a desk, bedside table or nearby USB-A charger. Measure the reach required and avoid pulling the cable taut. Keep the cable away from sharp edges, heat sources and repeated door or chair movement. Do not bend sharply at the connector or wrap it tightly around a power adapter. A longer VL2-series variant is a different model/configuration and should not be substituted for the 1m VL2AL.
Star Tech lists a rated voltage of 5V and current of 2.4A for the VL2AL. This corresponds to a listed electrical rating of up to 12W under the stated voltage/current, but actual charging depends on the adapter, device, cable condition and negotiation. The listing does not verify USB Power Delivery, Apple fast-charge capability or sustained output on every charger. Do not exceed the device and adapter ratings.
The reviewed product sources identify a Lightning connector and describe iPhone or Apple-device use, but they do not provide verified MFi certification evidence. Do not describe the cable as MFi-certified or promise compatibility with every iOS release. Check the package and manufacturer documentation for certification and supported models. If the device shows an accessory warning, stops charging or fails data connection, discontinue use and contact the seller or manufacturer.
Skyland and Newaz listings describe silicone cable material with TPE components. The specific layer construction, strain-relief material, conductor gauge, shielding, connector plating and durability test results are not consistently documented. The flexible jacket description does not mean the cable is indestructible, waterproof or suitable for extreme temperatures. Avoid sharp folds, crushing and prolonged exposure to heat or moisture.
The VL2AL is marketed as a fast-charging/data cable, but a reliable model-specific data rate and supported charging protocol were not found in reviewed sources. The 5V/2.4A rating is not the same as USB-PD or a guaranteed Apple fast-charge mode. Use a known-compatible adapter and monitor the device’s charging behavior. Do not transfer sensitive data or update a device based solely on an unverified cable claim; check the manufacturer’s stated function.
Connect the USB-A end to a compatible power source or computer and the Lightning end to a supported device. For charging, use a quality power adapter that matches the device requirements. For data or syncing, the host, operating system and cable must support that function; the product listing does not specify a transfer rate. If a computer does not detect the device, test another port and a known-supported cable, then inspect the device trust and sync settings.
If charging is intermittent, reseat both ends, inspect the plugs and device port for debris, and test a compatible adapter and outlet. Avoid inserting metal tools into the Lightning port. If the cable or connector becomes unusually hot, disconnect it and stop use. If data transfer is the issue, try another USB-A port and verify that the model supports data sync. An accessory warning may indicate certification or compatibility issues; consult the seller or Fantech support.
Current warranty terms depend on the seller and selected offer. Confirm warranty period, service location and claim procedure before ordering. Other retailers may advertise different prices, stock or return terms; these do not establish BiponiBD’s live offer. Check the package for VL2AL, 1m length, USB-A to Lightning connectors and the stated 5V/2.4A rating. Keep the purchase invoice and packaging for a service claim.
VL2AL offers a compact 1m USB-A-to-Lightning connection and retailer-listed silicone/TPE construction with a 5V/2.4A rating. It may suit compatible Lightning devices when used with an appropriate USB-A power source. MFi status, specific fast-charge protocol, data rate and exact model coverage were not verified. Check the device, charger and certification requirements before purchase.
Fantech VibeLINK VL2AL is a 1m USB-A-to-Lightning cable. Retailers list silicone plus TPE construction and 5V/2.4A. MFi status, Apple fast-charge support and data transfer speed were not verified. Use a compatible USB-A adapter and Lightning device, and confirm current warranty with the seller. The 1m VL2AL is distinct from other VL2-series connector or length variants.
Helpful answers
Product-specific answers maintained with the catalog information.
The model is Fantech VibeLINK VL2AL.
It has a USB Type-A end and a Lightning end.
Retailer listings specify 1 meter.
Star Tech lists 2.4A at 5V for the VL2AL. Actual charging depends on the charger and device.
MFi certification was not verified in the reviewed product sources; check manufacturer documentation.
USB-PD support was not specified for this USB-A-to-Lightning model.
A specific Apple fast-charge protocol was not verified; charging depends on compatible devices and adapter.
The model is marketed as a data cable, but a specific transfer rate was not documented.
Retailers describe silicone cable material with TPE components.
Confirm the current warranty period and claim process with the selected seller.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.