Pros
- Small 2g pack for limited thermal-interface servicing
- Manufacturer publishes technical values and intended applications
- Can be considered for compatible CPU/GPU heatsink interfaces when the device guide permits
All categories
New conditionComputer Accessories
Maxtor · CTG8 2g Thermal Paste
Maxtor CTG8 is a 2g grey thermal paste with manufacturer-listed 12.8 ± 0.5 W/m·K conductivity; confirm pack and seller terms.
Approximate Market Price
BDT 500
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 500
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
Maxtor CTG8 is a grey thermal interface paste sold in this record as a 2g pack. It is applied as a thin interface between a compatible processor or other heat-producing component and its heatsink, following the device or cooler maker’s service instructions. Maxtor lists thermal conductivity of 12.8 ± 0.5 W/m·K, density of 2.5 ± 0.1 g/ml and an operating range of −50°C to 250°C. Star Tech and local retailers list density as 2.8 g/ml and viscosity as 85,000 mPa·s; published density differs between sources, so both figures are attributed below.
Thermal paste fills microscopic surface gaps between a heat source and a heatsink to support heat transfer across the contact interface. It does not replace a heatsink, fan, vapor chamber or correct mounting pressure. The CTG8 manufacturer describes use with CPUs and GPUs, along with several other electronics applications. Confirm that the compound is suitable for the exact device and surface before applying it, especially for laptops, consoles and other assemblies where access or service requirements vary.
Maxtor’s CTG8 product page specifies thermal conductivity at 12.8 ± 0.5 W/m·K using ASTM D5470, density at 2.5 ± 0.1 g/ml using ASTM D792, non-electrical-conduction claim, grey color and a −50°C to 250°C operating-temperature range. Maxtor also lists dielectric strength and an evaporation test result. These are manufacturer-stated material data, not a promise of a particular CPU temperature reduction. Actual cooling depends on the chip, heatsink, mounting, application thickness, airflow, ambient temperature and workload.
Some local retailer specifications list density as 2.8 g/ml and viscosity as 85,000 mPa·s, while Maxtor’s global product pages list density as 2.5 ± 0.1 g/ml and do not present that same viscosity value in the visible product data. The manufacturer and retailers all list the CTG8 model and 12.8 W/m·K conductivity, but density is not consistent. This listing preserves the source attribution rather than presenting the differing density values as one definitive measurement. Ask the seller for the exact package or technical sheet if a specific batch specification matters.
The reviewed Bangladesh listings identify a 2g pack and the paste is described as grey. The small pack is intended for limited servicing, but the number of applications depends on the component size, how much material is needed and application technique. Net weight does not by itself establish the exact number of installations. Check that the received CTG8 packaging is sealed, clearly identified and carries the expected quantity. A spatula or other accessory is not confirmed in this BiponiBD record.
Maxtor lists CPUs and GPUs among intended uses and also mentions power supplies, LED modules, engine control units, gaming consoles and laptops. That broad material application list does not guarantee compatibility with every assembly. Follow the original equipment manufacturer’s service manual and use only the specified thermal interface material at the specified location. Do not substitute thermal paste for thermal pads or putty where a device requires a particular thickness or gap-filling material.
Power off and disconnect the equipment before service. Follow the device or cooler manufacturer’s instructions for removing the heatsink, cleaning old compound, applying new material and tightening the assembly. Apply only the amount and pattern recommended for the component; excess compound can spread beyond the intended interface. Avoid contaminating contacts, sockets, connectors or surrounding parts. If the device is under warranty or difficult to disassemble, use an authorized service provider rather than opening it without checking the warranty terms.
Maxtor describes CTG8 as not electrically conductive and lists an operating range from −50°C to 250°C. These manufacturer material claims do not make careless application safe: keep paste away from contacts, connectors and unrelated surfaces, and avoid relying on it outside the stated application instructions. Temperature range is a material specification, not a recommended processor temperature and not evidence of a measured temperature improvement in a particular system.
Keep the container closed and store the compound according to the package instructions, away from children, dust and contamination. Do not use dried, separated or contaminated compound without checking the manufacturer’s guidance. Prevent contact with eyes and wash skin after handling; consult the package safety information for handling and disposal. The reviewed sources do not establish an expiry date or a storage life for this exact retail pack, so check the label and ask the seller about stock age if that is important.
Star Tech and Astrix list the 2g Maxtor CTG8 product, but their displayed prices and stock can change. A manufacturer data page that lists material durability or specifications does not establish a retail warranty. No confirmed warranty term for this BiponiBD offer was found in the reviewed sources. Before ordering, confirm the exact CTG8 model, 2g net quantity, sealed package, current price, availability, included accessories and the selected seller’s written warranty and return terms.
It is a grey thermal interface paste; this product record is for a 2g pack.
Maxtor lists 12.8 ± 0.5 W/m·K. Retail listings commonly state 12.8 W/m·K.
Maxtor lists −50°C to 250°C. This is a material specification, not a target CPU temperature.
Maxtor lists 2.5 ± 0.1 g/ml, while local retailers list 2.8 g/ml. The published values differ.
Maxtor describes CTG8 as non-electrically-conductive. Avoid contacts and follow the application instructions regardless.
Maxtor lists CPUs and GPUs as applications. Check the device maker’s service instructions and required interface material.
Bangladesh retailer pages identify the product as a 2g pack; confirm the actual BiponiBD offer packaging.
An included spatula is not confirmed for this BiponiBD record. Check the seller’s package details.
The reviewed sources do not verify a warranty for the selected BiponiBD seller. Confirm written terms before purchase.
No fixed temperature reduction can be promised; results depend on the device, heatsink, mounting and application.
Source basis: Maxtor manufacturer product pages, Star Tech, Astrix Technologies and Techland BD. The published density values differ, and seller warranty/accessories are not verified for this BiponiBD offer.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a grey thermal interface paste; this product record is for a 2g pack.
Maxtor lists 12.8 ± 0.5 W/m·K. Retail listings commonly state 12.8 W/m·K.
Maxtor lists −50°C to 250°C. This is a material specification, not a target CPU temperature.
Maxtor lists 2.5 ± 0.1 g/ml, while local retailers list 2.8 g/ml. The published values differ.
Maxtor describes CTG8 as non-electrically-conductive. Avoid contacts and follow the application instructions regardless.
Maxtor lists CPUs and GPUs as applications. Check the device maker’s service instructions and required interface material.
Bangladesh retailer pages identify the product as a 2g pack; confirm the actual BiponiBD offer packaging.
An included spatula is not confirmed for this BiponiBD record. Check the seller’s package details.
The reviewed sources do not verify a warranty for the selected BiponiBD seller. Confirm written terms before purchase.
No fixed temperature reduction can be promised; results depend on the device, heatsink, mounting and application.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.