Ocypus Gamma ET40 thermal paste
Gamma ET40 is a grey thermal grease intended for the interface between a heat-producing component and its cooling surface. Ocypus describes it as a compound that fills small contact gaps and lists it for appropriate CPU, GPU, laptop and other component applications. It is used as part of a correctly installed cooling system; it is not a plug-and-play electronic accessory or a replacement for a heatsink.
Manufacturer specifications
The official Gamma ET40 table lists thermal conductivity of 12.5W/m·K and thermal resistance of 0.0016°C·in²/W. These are manufacturer specifications, not results from an independent test performed for this page. Actual component temperatures also depend on cooler design, contact pressure, airflow, ambient temperature, workload and the condition of the old thermal interface. No fixed temperature reduction or overclocking result is promised.
Ocypus lists a value of 2.3g/cm³ under its Specific Gravity at 25°C heading. That value is reproduced with the manufacturer’s label and unit. It is not a tube weight or a statement of how many grams of paste are supplied. The product-dimension entry is 20 × 20 × 118mm in length, width and height order; those dimensions likewise do not establish the amount of usable compound.
Temperature range and electrical properties
The usable compound temperature range is -50°C to 150°C. This describes the stated range for the thermal grease, not a safe target operating temperature for a processor or graphics chip. Follow the component manufacturer’s own operating limits and monitor cooling performance after installation.
The official specification identifies ET40 as electrically non-conductive. This is useful product information, but it should not be translated into a claim that every spill or application mistake is harmless. Keep the compound on the intended thermal interface and follow the component and cooler instructions. No separate non-capacitive claim, chemical safety sheet or universal material-compatibility test was established by the sources checked here.
Where thermal grease fits in a cooling system
Thermal paste helps fill microscopic gaps at suitable contacting surfaces. It does not correct a loose cooler, a damaged fan, an unsuitable heatsink or a large mechanical gap. A system that requires a thermal pad of a specific thickness should not have that pad replaced with paste without instructions from the equipment manufacturer.
Although Ocypus names CPU, GPU and laptop applications, this is not proof that every device can be serviced in the same way. Some assemblies use different interface materials or have delicate exposed components. Check the exact hardware service instructions and any warranty implications before removing a cooler. The selected paste must be used only where a paste interface is appropriate.
Application and handling considerations
Power down and disconnect the equipment before servicing the cooling assembly. Follow the hardware and cooler instructions for preparing the contact surfaces, applying the required amount and fastening the cooler evenly. The amount and pattern can vary with the contact area and assembly design, so this listing does not prescribe a universal dose for every CPU or GPU.
Ocypus describes smooth and even application. That description does not establish a particular curing time, number of reapplications or maintenance interval. After reassembly, confirm that the cooler is secured, fans operate and temperatures are appropriate for the hardware under normal use. If cooling remains poor, investigate the full cooling system instead of assuming that more paste will solve the problem.
Quantity, packaging and storage
A verified net paste weight or volume was not shown in the official specification table checked for this update. Do not assume that ET40 means 40g or that the external product dimensions can be converted into the supplied paste quantity. Ask the seller to confirm the quantity printed on the actual package, particularly when comparing value against a different thermal compound.
Package inclusions such as a spreader, cleaning wipe or application guide should also be confirmed with the seller. Shelf life, storage temperature, opening date limits and the number of applications were not established from the checked sources. Follow the label instructions on the supplied product and avoid using an opened compound whose condition is uncertain.
Product identifiers and local warranty
The manufacturer lists part number Gamma-ET40-GRN00XXX-GL and EAN 6977414880525. Match those identifiers and the Gamma ET40 model when checking the package, rather than substituting specifications from Gamma ET20 or another thermal grease in the range.
Star Tech lists a one-year warranty for its Bangladesh offer. Confirm the supplying seller’s coverage, exclusions, invoice requirements and service process. A retailer warranty should not be treated as a guarantee of a particular CPU temperature or a statement that application mistakes are covered. Approximate market pricing is informational and should be checked against an actual seller offer before purchase.
Sources
Core specifications and identifiers were checked against the official Ocypus Gamma ET40 specification and manufacturer overview. Local price and warranty were checked against Star Tech’s Gamma ET40 listing. Quantity, storage and accessory details remain seller-confirmation items.