Pros
- Provides a designated place to rest a compatible headset
- Compact desktop footprint relative to a 25.5cm tall support
- Lightweight plastic design is easy to reposition
All categories
New conditionHeadphones & Speakers
Onikuma · ST-1
ONIKUMA ST-1 is a black ABS headphone stand measuring 140 × 75 × 255mm and weighing 126g. Check desk space and headset fit before buying.
Approximate Market Price
BDT 450
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 450
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The ONIKUMA ST-1 is a freestanding desktop stand for storing a compatible headset between uses. Bangladesh retailer listings describe a black ABS plastic frame, a stable anti-slip base, dimensions of 140 × 75 × 255mm and weight of 126g. It keeps a headphone or gaming headset accessible and off the desk surface. The ST-1 is a passive stand: it has no listed USB ports, audio jack, RGB lighting, charging feature or electronics.
Place the stand on a clean, flat desk with the base fully supported. Retailers describe an anti-slip base intended to reduce movement during ordinary placement, but this is not a clamp or adhesive mount and does not make the stand tip-proof. Keep it away from desk edges, cables that may snag and areas where it can be knocked over. Do not use the stand to carry a headset or pull it by the top.
The listed product dimensions are 140 × 75 × 255mm (approximately 14 × 7.5 × 25.5cm). Allow enough vertical clearance for the headset band and enough base area so the stand sits flat. Measure your desk shelf or storage space before ordering. These are product dimensions rather than shipping-box dimensions; packaging may be larger. Check the seller’s listing if exact measurements are critical.
The ST-1 is listed as made from ABS plastic and weighs about 126g. Its low weight makes it easy to reposition, while also meaning that the stand depends on a level surface and careful handling. The published material does not establish a maximum supported headset weight, impact rating or long-term load limit. Avoid placing unusually heavy equipment or stacking objects on the stand.
The product is marketed as compatible with headset sizes, but no exact headband width, clamp range or supported weight is specified. Rest the headset gently over the top support so the headband is not stretched or pinched and the earcups hang without contacting sharp desk items. Check the fit with your specific headset and avoid forcing a wide or rigid headband onto the stand.
A dedicated stand gives a headset a consistent storage spot and can free desk surface when the headset is not in use. It can help keep earcups away from spills and loose accessories, but the stand does not protect the headset from dust, pets, children or accidental impact. Place the earcups so their cushions are not crushed against nearby objects and route headset cables without tension.
The available local descriptions identify the stand as a compact ABS accessory, but package contents and whether any assembly is needed may depend on the seller’s stock. Confirm that the selected package includes the stand components shown in the product photos. The headset pictured in a listing is not confirmed as included. Follow any supplied assembly directions and do not overtighten or force plastic joints.
Disconnect and remove the headset before cleaning. Wipe the ABS surface with a soft, slightly damp cloth, then dry it. Avoid abrasive pads, solvents and excess liquid that could damage the surface or anti-slip pads. Check the base periodically for dust that could reduce grip. If a support tab or base is cracked or loose, stop using it to avoid dropping the headset.
Keep the stand on a stable desk away from heat, direct sunlight, liquids and the edge of a raised shelf. Ensure the headset cable does not pull the lightweight stand. If the desk surface is uneven or slippery, choose a more secure placement rather than relying only on the anti-slip description. The ST-1 is intended for desktop storage and is not a wall mount, travel case or headset hook under a desk.
The ST-1 has no electrical functions and does not charge, connect or amplify a headset. Compatibility depends on the headset’s headband shape, width and weight; the listing’s general compatibility language is not a measured universal fit guarantee. Dimensions, material and weight are reported by local sellers, while maximum load, anti-slip coefficient, assembly method and warranty coverage are not specified. Confirm those details with the seller if they affect your use.
This simple black ABS stand offers an accessible place to rest a compatible headphone, with listed dimensions of 140 × 75 × 255mm and a weight of 126g. The anti-slip base description supports ordinary desktop placement, but the lightweight freestanding design still needs a flat, protected location. No load rating or precise headset-fit range is provided, and the headset itself is not confirmed as included.
It is a freestanding desktop stand for storing a compatible headset or headphone.
Local retailers list an ABS plastic frame.
The listed product dimensions are 140 × 75 × 255mm.
Retailer listings state approximately 126g.
Local listings describe a stable anti-slip base, but it is not a clamp or tip-proof mounting system.
Fit depends on headband width, shape and weight. Exact supported dimensions and load are not specified.
A headset is not confirmed as included; check the selected seller’s package contents.
No lighting, USB ports or audio electronics are specified for the ST-1 stand.
Assembly requirements are not consistently stated. Check the instructions and package contents with the seller.
Remove the headset and wipe the ABS surface with a soft, slightly damp cloth; avoid solvents and excess liquid.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a freestanding desktop stand for storing a compatible headset or headphone.
Local retailers list an ABS plastic frame.
The listed product dimensions are 140 × 75 × 255mm.
Retailer listings state approximately 126g.
Local listings describe a stable anti-slip base, but it is not a clamp or tip-proof mounting system.
Fit depends on headband width, shape and weight. Exact supported dimensions and load are not specified.
A headset is not confirmed as included; check the selected seller’s package contents.
No lighting, USB ports or audio electronics are specified for the ST-1 stand.
Assembly requirements are not consistently stated. Check the instructions and package contents with the seller.
Remove the headset and wipe the ABS surface with a soft, slightly damp cloth; avoid solvents and excess liquid.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.