Pros
- Connects a modern USB-C host to many USB-B printers and scanners
- 1m length suits a nearby desk setup
- Manufacturer lists 5Gbps and double-braided shielding
All categories
New conditionComputer Accessories
Onten · OTN-69006 1m USB-C to USB-B Cable
Onten OTN-69006 is a 1m USB-C to USB-B cable rated up to 5Gbps, with all-copper double-braided shielding; confirm printer support and warranty.
Approximate Market Price
BDT 650
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 650
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
Onten OTN-69006 is a 1-meter cable with a USB Type-C male connector at one end and a USB Type-B male connector at the other. It is intended to connect a USB-C host, such as a compatible laptop, to a USB-B printer, scanner or other peripheral. Onten’s product page lists a transfer rate up to 5Gbps, full-copper core, double-braided shielding and a 5.0mm outside diameter. Local retailers also describe it as a printer cable and list the same model, connectors and length.
The upstream Type-C plug is reversible and fits compatible USB-C ports. The downstream Type-B plug is the larger square-style connector used on many printers and some scanners/peripherals. Confirm the exact Type-B port shape on the device: USB Type-B, Micro-B and Mini-B are different connectors. The cable does not connect to USB-A hosts or Lightning devices without a separate suitable adapter, and it is not a charging adapter or printer network server.
Onten and local listings specify transfer up to 5Gbps. This is the maximum listed signaling rate, not a guaranteed file-copy or print speed. One Star Tech description contains a conflicting statement that the cable supports USB 3.1 Gen 1 up to 10Gbps, while its key specification table and the manufacturer list up to 5Gbps. This content follows the manufacturer’s 5Gbps specification and does not promise 10Gbps. The host, cable, peripheral and negotiated USB mode all affect actual throughput.
Use the cable only when the source has a compatible USB-C data port and the peripheral has a matching USB Type-B port. Many printers use USB-B, but the printer must also support a direct USB host connection and have the appropriate driver/software installed. The cable alone does not guarantee printer discovery, scanning, device control or operating-system compatibility. For a printer with Wi-Fi or Ethernet, this cable is an alternative wired connection only if the printer provides USB-B host connectivity.
The cable length is 1 meter, useful for nearby desk and workstation arrangements. Onten lists an all-copper core, double-braided shielding and 5.0mm outer diameter; Ryans repeats those construction details. Route it without tight bends, crushing, or tension on the connector shells. The reviewed sources do not give conductor gauge, certified bend-cycle testing or a detailed shielding attenuation measurement, so those performance properties should not be inferred.
Ryans identifies maximum charging power as not applicable, consistent with its printer/data-cable positioning. Do not use the 5Gbps data rating as evidence of laptop charging support or USB Power Delivery wattage. Device power behavior depends on host and peripheral design. The cable is intended for data connectivity between USB-C and USB-B devices, not as a dedicated high-wattage charging lead.
Connect the cable between the computer’s USB-C port and the peripheral’s USB-B port. Install or select the printer/scanner driver when required by the operating system, then check the device settings and print/scan test. If the device is not recognized, confirm the port types, try another supported USB-C host port, inspect the cable and test the peripheral with a known-good cable. A Type-C connector may fit yet still lack host data support on some adapters or devices.
Keep both connector ends clean and dry. Insert plugs straight without force and disconnect by holding the connector housing, not pulling the braided cord. Avoid running the cable across pinch points or sharp edges. Stop using it if the jacket frays, connectors loosen, pins bend or the cable becomes intermittent. Do not open or repair connectors yourself; contact the seller if the cable fails during its written warranty period.
The product page describes a USB-C-to-printer cable and a maximum 5Gbps transfer rate. The sources do not confirm support for Thunderbolt-specific features, USB4, charging wattage, display output, all printer models, or 10Gbps operation. Compatibility also depends on the USB-C host supporting data and the printer exposing the correct USB-B interface. If your host has only USB-A or your device uses another USB-B variant, choose a cable/adapter with matching connectors and data standard.
Ryans and Star Tech list two-year replacement warranty for their own listings; the selected BiponiBD seller’s provider and written conditions may differ. Confirm OTN-69006 model, Type-C male to Type-B male connectors, 1m length, up to 5Gbps claim, black color, cable condition, current stock and warranty/return terms. If 10Gbps is essential, request model-specific documentation because the reviewed Star Tech text conflicts and Onten specifies up to 5Gbps.
It connects a USB-C host to a compatible USB Type-B peripheral such as a printer or scanner.
USB Type-C male to USB Type-B male.
The listed cable length is 1 meter.
Onten lists up to 5Gbps. A Star Tech description says 10Gbps, conflicting with its own table and the manufacturer.
Charging wattage is not specified; it is listed as a printer/data cable.
Only if the printer has a compatible USB-B port and supports direct USB connection with your host and driver.
Onten and retailers list an all-copper core with double-braided shielding.
Those features are not documented for this model.
Ryans and Star Tech list two-year replacement warranty for their offers; confirm BiponiBD seller terms.
This cable has a USB-C host plug; use a suitable cable or adapter for USB-A.
Source note: Onten official OTN-69006 page, Ryans and Star Tech. Manufacturer lists up to 5Gbps; one retailer description says 10Gbps despite its table showing 5Gbps. Verify the exact required data rate and warranty.
Helpful answers
Product-specific answers maintained with the catalog information.
It connects a USB-C host to a compatible USB Type-B peripheral such as a printer or scanner.
USB Type-C male to USB Type-B male.
The listed cable length is 1 meter.
Onten lists up to 5Gbps. A Star Tech description says 10Gbps, conflicting with its own table and the manufacturer.
Charging wattage is not specified; it is listed as a printer/data cable.
Only if the printer has a compatible USB-B port and supports direct USB connection with your host and driver.
Onten and retailers list an all-copper core with double-braided shielding.
Those features are not documented for this model.
Ryans and Star Tech list two-year replacement warranty for their offers; confirm BiponiBD seller terms.
This cable has a USB-C host plug; use a suitable cable or adapter for USB-A.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.