Pros
- 2m reach suits connections between nearby audio devices
- Simple male-to-male connection for matching 3.5mm ports
- Copper-strand construction is described in a local technical listing
All categories
New conditionComputer Accessories
Onten · OTN-A101
ONTEN OTN-A101 connects compatible 3.5mm audio output and input ports with a 2m male-to-male cable. Listings describe flexible enameled copper conductors.
Approximate Market Price
BDT 450
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 450
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The ONTEN OTN-A101 is a 2-metre 3.5mm male-to-male analogue audio cable. It can connect a compatible headphone or line output to an audio input such as powered speakers, a car AUX jack or another audio component. Star Tech lists ten 0.08mm enameled copper strands in its conductor construction, described as helping the cable remain flexible. The exact pole count, shielding, microphone pass-through and inline-control support are not specified in the reviewed 2m listings.
Both ends use 3.5mm male plugs. Connect one end to a compatible audio source output and the other to a matching input. The cable is not directional for a basic analogue connection, but the source and destination ports have different roles. Do not connect two outputs together. If using a car stereo or powered speaker, select its AUX or line input rather than a headphone output.
The listed cable length is 2m, allowing more separation between nearby devices than a short patch cable. Measure the path and leave slack near the plugs so movement does not pull on the phone, laptop, speaker or car jack. Avoid routing the lead across walkways, under chair wheels or alongside mains wiring where it can be damaged or pick up interference. The cable is not an extension with a female socket; both ends are male.
The cable carries analogue audio between compatible 3.5mm ports. The reviewed OTN-A101 2m listings do not clearly state TRS/three-pole or TRRS/four-pole wiring, so specific microphone, headset button or combo-jack functions should not be assumed. For a stereo headphone/AUX path, verify the destination’s supported connector and signal. If microphone use is required, ask the seller for a wiring diagram or choose a cable explicitly specified for TRRS mic operation.
Star Tech describes ten tightly wrapped strands of 0.08mm enameled copper used to keep the cable flexible. This construction detail does not establish cable gauge equivalence, shielding, connector plating or a quantified sound-quality improvement. Other listings may use simplified material descriptions. Treat the specification as a cable-construction note, not as a guarantee of noise cancellation or compatibility with every professional audio installation.
To play audio through powered speakers or a car stereo, connect the OTN-A101 to the source device’s 3.5mm audio output and the system’s 3.5mm AUX/line input. Then select the corresponding input on the receiving equipment. Some vehicles lack a 3.5mm AUX jack or use a different input, in which case this cable alone cannot connect them. For passive speakers, a 3.5mm input may not be present and amplification is required.
The cable is a passive analogue link and does not contain a listed DAC, amplifier or signal processor. Sound depends on the original source, input circuitry, connector contact and surrounding electrical environment. A 2m cable can be routed flexibly but may pick up interference if damaged or run close to power equipment. If hum appears, test another cable, check grounding and move the audio path away from power adapters.
Check that audio is playing, source volume is up, both plugs are fully seated and the destination is set to the correct AUX/line input. Test each device with a known-working cable and inspect the jacks for lint or damage. If only one channel plays, reinsert both plugs and test a different source or input. If a microphone or remote control does not work, verify the cable pole arrangement; that capability is not established here.
Hold the plug body when inserting or removing the cable rather than pulling its wire. Avoid sharp kinks near the strain relief, store it loosely coiled and keep connectors dry. Do not force a 3.5mm plug into a smaller or differently keyed port. Stop use if the cable jacket is split, a plug is bent or audio becomes intermittent when the cable is still.
The local listings identify an OTN-A101 2m audio cable. Confirm the exact length, black color, conductor construction, warranty provider, return terms and supplied package with the selected seller. No adapter, extension, headset or speakers are confirmed as included. Product pages for different OTN-A101 lengths should not be treated as proof of this exact 2m unit’s construction or warranty. External retailer prices and availability are not a live BiponiBD offer.
The OTN-A101 provides a simple 2m connection between compatible 3.5mm audio ports, with copper-strand construction listed by Star Tech. It requires an analogue output and input, and it does not convert USB, Lightning, optical or RCA signals. Pole configuration, mic and inline-control support, shielding and measured performance are not documented in the reviewed 2m listings, so verify those needs before use.
It is a 2m 3.5mm male-to-male analogue audio cable.
It connects compatible 3.5mm audio output and input ports, such as a source device and AUX input.
The product listing specifies 2 metres.
Yes, if the source has a compatible 3.5mm output and the vehicle has a 3.5mm AUX input. Select AUX on the stereo.
It can connect to powered speakers with a compatible 3.5mm line input. Passive speakers need amplification.
Star Tech describes ten tightly wrapped strands of 0.08mm enameled copper.
Microphone pass-through and exact pole configuration are not specified for the reviewed 2m listing.
No. Both ends are 3.5mm male plugs.
Not directly. A separate compatible audio converter may be required for digital-only ports.
Warranty coverage varies or is not clearly specified; verify it with the seller.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a 2m 3.5mm male-to-male analogue audio cable.
It connects compatible 3.5mm audio output and input ports, such as a source device and AUX input.
The product listing specifies 2 metres.
Yes, if the source has a compatible 3.5mm output and the vehicle has a 3.5mm AUX input. Select AUX on the stereo.
It can connect to powered speakers with a compatible 3.5mm line input. Passive speakers need amplification.
Star Tech describes ten tightly wrapped strands of 0.08mm enameled copper.
Microphone pass-through and exact pole configuration are not specified for the reviewed 2m listing.
No. Both ends are 3.5mm male plugs.
Not directly. A separate compatible audio converter may be required for digital-only ports.
Warranty coverage varies or is not clearly specified; verify it with the seller.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.