Pros
- Longer reach than short AUX leads for some setups
- Standard 3.5mm male plugs at both ends
- Exact 5m listing identifies connector shell and jacket materials
All categories
New conditionCameras & Audio
Onten · OTN-A101 5M 3.5mm Audio Cable
Onten OTN-A101 is a 5m AUX cable with 3.5mm male plugs at both ends, aluminum shells, striped black TPE and gold-plated connectors.
Approximate Market Price
BDT 550
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 550
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Onten OTN-A101 5m is a wired analog audio cable with a 3.5mm male plug at each end. The exact 5-meter listing describes aluminum connector shells, a black striped TPE cable jacket and gold-plated connectors. Ryans lists an OTN-A101 5-meter black male-to-male version. This cable is intended to connect compatible 3.5mm audio output and input jacks; it does not convert digital USB, HDMI or optical audio signals.
Both ends are listed as 3.5mm male connectors. Check the ports on both devices before ordering: many phones, laptops, car stereos, speakers and other equipment use 3.5mm jacks, but some devices omit the port or use a different connector. Port shape alone does not guarantee microphone, remote-control or headset-button support. This listing does not specify a four-pole TRRS wiring standard, so treat it as an audio connection cable and confirm the required plug wiring for specialized headset functions.
The selected product is the 5-meter version, approximately 16.4 feet. Extra length can help route audio between devices placed farther apart, but measure the actual path with slack before purchase. A long cable can be more exposed to tangling or accidental pulls; route it away from walkways and avoid tight bends. Do not confuse it with OTN-A101 listings in 1.5m, 2m or 3m lengths, which are separate length variants.
A male-to-male 3.5mm cable carries analog audio between compatible source and receiving jacks, such as a line/headphone output and an AUX input. It may be used with supported speakers, amplifiers, car audio or other equipment with the matching ports. Actual sound level and quality depend on the devices, source, connector condition and interference; no measured frequency response, shielding grade, microphone support or noise-reduction rating is published for this exact 5m listing.
The exact 5m listing states aluminum shells and a black striped TPE outer material, and notes gold-plated connectors. These describe the external connector and cable materials; they do not establish a specific copper conductor gauge, shielding construction or corrosion-resistance test. A separate 3m listing for the OTN-A101 mentions 0.08mm enameled copper, but that detail is not confirmed for this exact 5m variant and is not used as its specification.
Lower the device volume before connecting. Insert each plug fully into the matching 3.5mm jack, then select the correct source or AUX input and raise volume gradually. If there is no sound, check the selected input, output volume and connector seating at both ends. Do not force a plug into a port with a different size or shape. This is a passive cable; the reviewed 5m listing does not describe a driver, battery, power adapter or active signal converter.
The cable works only where the source and destination have compatible 3.5mm audio ports and signal roles. It does not directly connect USB-C, Lightning, USB-A, RCA, optical or HDMI ports without suitable separate adapters or converters. Many newer phones require a compatible audio adapter. Separate left/right audio channels may be supported by the host equipment, but the exact conductor and plug-pole details are not documented in the 5m product listing.
Unplug by holding the connector body rather than pulling the cable. Avoid sharp bends, pinching, heavy objects and tension on the jack. Coil loosely for storage and keep the metal contacts clean and dry. Aluminum shells and TPE covering are listed, but no bend-cycle, tensile, water-resistance or environmental rating is published for this exact variant. Inspect the connector and cable if audio crackles when moved.
Reviewed exact-length listings identify OTN-A101 at 5m, black, with 3.5mm male-to-male plugs; Astrix gives aluminum shells, striped black TPE and gold-plated connectors. The OTN-A101 is also sold in shorter lengths, so length-specific details must be checked. The 5m listing does not verify conductor gauge, shielding, TRRS headset microphone support, measured sound performance or device-specific compatibility.
Astrix describes an official warranty, while seller pages for other OTN-A101 lengths list different warranty durations. Those retailer terms do not establish the warranty for this BiponiBD offer. Before purchase, confirm the exact 5m variant, both male 3.5mm plugs, package contents, seller warranty provider and claim process, return policy, stock and current price. The selected seller’s written terms control.
This is the 5-meter OTN-A101 version, approximately 16.4 feet.
A 3.5mm male connector is listed at each end.
It can if both devices provide compatible 3.5mm audio ports and the phone supports audio output through that port or a suitable adapter.
It is a separate 5m length variant. OTN-A101 is sold in multiple lengths; verify the selected listing.
The exact 5m Astrix listing specifies gold-plated connectors.
The exact 5m listing describes black striped TPE and aluminum connector shells.
That is not confirmed. The 5m listing does not specify TRRS pole wiring or microphone support.
No conversion is specified. Those ports need a suitable separate adapter or active converter.
It is described as a passive analog cable; no battery, power adapter or driver is listed.
Warranty descriptions differ by seller and cable listing; confirm the selected BiponiBD seller’s written terms.
Source basis: Astrix Technologies exact 5m OTN-A101 listing, Ryans exact 5m category item and Star Tech OTN-A101 3m reference only for model-family context. 3m cable construction details are not assumed for 5m.
Helpful answers
Product-specific answers maintained with the catalog information.
This is the 5-meter OTN-A101 version, approximately 16.4 feet.
A 3.5mm male connector is listed at each end.
It can if both devices provide compatible 3.5mm audio ports and the phone supports audio output through that port or a suitable adapter.
It is a separate 5m length variant. OTN-A101 is sold in multiple lengths; verify the selected listing.
The exact 5m Astrix listing specifies gold-plated connectors.
The exact 5m listing describes black striped TPE and aluminum connector shells.
That is not confirmed. The 5m listing does not specify TRRS pole wiring or microphone support.
No conversion is specified. Those ports need a suitable separate adapter or active converter.
It is described as a passive analog cable; no battery, power adapter or driver is listed.
Warranty descriptions differ by seller and cable listing; confirm the selected BiponiBD seller’s written terms.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.