Pros
- Connects compatible 3.5mm audio output and input jacks
- 1.5m length suits nearby desk or car AUX connections
- Gold-plated plugs and enameled copper listed by retailer
All categories
New conditionComputer Accessories
Onten · OTN-A101 1.5m 3.5mm Male-to-Male Audio Cable
ONTEN OTN-A101 is a 1.5m 3.5mm male-to-male audio cable with gold-plated plugs and enameled copper listed. Check headset wiring and warranty.
Approximate Market Price
BDT 397
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 397
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The ONTEN OTN-A101 is a 1.5-meter 3.5mm male-to-male audio cable for connecting compatible analog audio outputs to inputs. Star Tech lists gold-plated connectors and 0.08mm enameled copper; Cartup describes it as a stereo AUX cable. Retailers also sell other OTN-A101 lengths, including 3m and 5m, so this page covers the 1.5m variant. The cable carries an audio signal; it does not amplify, decode digital audio or change connector types.
Both ends have 3.5mm male plugs. Connect one end to a compatible audio output on a phone, computer, tablet, car stereo or player, and the other to a matching audio input on speakers, headphones or another system. Verify that the equipment has the correct 3.5mm jack; USB-C, Lightning and RCA ports need a separate suitable adapter. The reviewed listings do not establish a precise TRS/TRRS contact layout, so headset microphone and remote pass-through should not be assumed.
Cartup describes the OTN-A101 as a stereo audio cable for AUX connections. Stereo playback requires compatible stereo output and input jacks, and the source and destination settings must be correct. The cable itself does not create stereo from a mono source or improve the quality beyond the connected equipment. For car audio, select the AUX input on the receiver and adjust source volume safely. For speakers, verify the jack is an audio input rather than a headphone output.
A male-to-male 3.5mm cable can link compatible audio jacks on a computer, phone with analog audio, portable player, car stereo or powered speaker. It is a passive connection and does not power unpowered speakers. Check the direction of audio signal and the device’s port labels; connecting two outputs together may cause poor sound or no playback. Newer phones without a 3.5mm port need a compatible digital-to-analog audio adapter, which is not included in the reviewed product listing.
The product is sold as an AUX/stereo audio cable, but the sources reviewed do not specify TRRS wiring, microphone support, inline remote buttons or CTIA/OMTP compatibility. If you need to extend a headset with a microphone or media controls, ask the seller to verify the pin count and pass-through functions for the exact OTN-A101 revision. A standard stereo AUX connection may carry headphone audio without supporting a headset microphone. Test the required functions before relying on it.
This catalog variant is 1.5 meters. Other OTN-A101 listings have different lengths, so confirm the package marking if reach is critical. Measure the route between audio devices and leave slack to avoid tension on the ports. Keep the cable away from chair wheels, sharp edges and tight bends near the plugs. Longer cables may be available under the same model family, but the 3m or 5m listing is a different length and should not be substituted without checking the selected SKU.
Star Tech lists gold-plated connector contacts and 0.08mm enameled copper. These are published component details; they do not guarantee a particular sound improvement, noise floor, shielding performance or service life. The reviewed pages do not specify overall cable gauge, braid/shielding construction, jacket material or bend-cycle rating. Keep plugs clean and dry, insert them straight and disconnect by holding the plug body instead of pulling the cable.
If audio is distorted, one-sided or noisy, fully seat both plugs, inspect the jacks for debris, lower the source volume and try a known-good device pair. Keep the cable away from tightly bundled power cables when practical. Test the source directly without the extension to determine whether the cable is involved. A loose socket, damaged connector or incompatible input/output can cause intermittent sound. The cable does not include volume controls, noise cancellation or an audio amplifier.
Some newer phones and laptops omit a 3.5mm jack or expose one only through a supported adapter. The OTN-A101 alone cannot connect to USB-C or Lightning ports. Use an adapter compatible with the device and analog audio requirements, and confirm any required microphone function before purchase. Bluetooth headphones or wireless audio are not provided by this passive cable. Keep the selected connection chain simple during setup to isolate any audio problem.
Route the 1.5m cable so that it does not create a trip hazard or place strain on connected devices. Avoid crushing it under furniture, sharply bending it at the plug or wrapping it tightly around a power adapter. Keep it dry and store with connectors protected from dust. Stop using the cable if its insulation splits, a plug loosens or playback becomes unreliable when the cable is moved. The reviewed listings do not state water resistance or repair procedures.
The pages reviewed establish connector type, 1.5m length and listed conductor/connector details, but do not confirm one warranty term for the selected BiponiBD offer. Other stores list 3m and 5m variants, and any warranty displayed for those offers may not apply to this SKU. Confirm the seller’s written coverage, return period, service location and claim requirements. On delivery, verify OTN-A101, 1.5m, 3.5mm male plugs at both ends and package condition; retain the invoice.
OTN-A101 provides a simple 1.5m male-to-male 3.5mm analog connection for compatible stereo/AUX equipment. Retailers list gold-plated contacts and 0.08mm enameled copper. It needs no battery, software or pairing. The exact TRS/TRRS wiring, headset microphone/remote support, shielding and warranty are not confirmed. It cannot connect directly to USB-C or Lightning digital ports, and other OTN-A101 listings have different cable lengths.
ONTEN OTN-A101 is a 1.5m 3.5mm male-to-male audio cable. Cartup describes stereo AUX use; Star Tech lists gold-plated connectors and 0.08mm enameled copper. Other listings show 3m and 5m variants. Microphone and inline remote wiring are not specified. Check the selected offer warranty and verify analog 3.5mm ports on both devices before ordering.
Helpful answers
Product-specific answers maintained with the catalog information.
The cable model is ONTEN OTN-A101.
It has 3.5mm male plugs at both ends.
This catalog variant is 1.5 meters; other listings show different lengths.
Cartup describes it as a stereo AUX cable; connected devices must also support stereo.
Yes, if the phone provides analog 3.5mm audio and the car stereo has an AUX input.
TRRS pinout and microphone pass-through are not specified; confirm with the seller.
Star Tech lists gold-plated connectors.
Star Tech lists 0.08mm enameled copper.
Not directly. A compatible audio adapter is needed and is not confirmed as included.
The selected offer warranty was not confirmed; ask the seller for written terms.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.