BiponiBD
All categories

All categories

Onten OTN-A201 1m Toslink Digital Optical Audio Cable product imageNew condition

Computer Accessories

Onten OTN-A201 1m Toslink Digital Optical Audio Cable

Onten · OTN-A201

Onten OTN-A201 is a 1m Toslink-to-Toslink digital optical audio cable for compatible S/PDIF audio ports.

Compare now

Approximate Market Price

BDT 500

Informational market estimate only; this is not a current Store offer.

Buying options
  • 1m Toslink-to-Toslink optical audio cable
  • 5.0mm line diameter listed by Star Tech/Astrix
  • Gold-plated connectors listed by retailers
  • For compatible optical S/PDIF audio ports

Compare store prices

Buying options

0 live offers

No live offers for this variant

BDT 500

Approximate Market Price

Informational market estimate only; this is not a current Store offer.

Observed price history

Loading history…

Product story

Details worth knowing

Product overview

The Onten OTN-A201 is a 1-metre digital optical audio cable with Toslink connectors at both ends. It connects equipment with matching optical S/PDIF ports, such as a compatible television and soundbar, AV receiver, or audio interface. Star Tech and Astrix list a 5.0mm line diameter and gold-plated connectors; these are retailer-listed details. Audio format and channel support depend on both devices and their settings, not on the connector alone.

Toslink connectors and connection

The cable has a Toslink optical plug at each end. Remove any protective caps before connecting, align each plug with the optical port, and insert it gently without twisting or forcing it. Connect the source’s optical digital audio output to the destination’s optical input. Keep the cable ends clean and protected when disconnected. Toslink is different from HDMI, RCA/coaxial digital audio, and 3.5mm analog audio.

Digital optical audio formats

Retailer listings mention S/PDIF, ADAT, Dolby Digital, and DTS compatibility. These labels do not mean every connected device can pass every format or channel configuration. The source device must output a format that the receiving equipment accepts, and the correct optical output/input must be selected in device settings. Check the television, soundbar, receiver, or interface manuals for supported formats and channel modes.

Length and line diameter

The OTN-A201 listing specifies a 1m length and a 5.0mm line diameter. Measure the route between equipment before purchase and allow a gentle curve so the cable is not pulled tight. Optical fiber can be damaged by sharp kinks or crushing; do not wrap it tightly around a small object or trap it under furniture. The listed outer line diameter is not the same as the optical fiber core diameter.

Optical signal and care

Optical audio carries the digital signal as light rather than an electrical audio connection. Avoid looking into an active optical port and keep dust away from the cable ends. Use the connector body when inserting or removing the plug rather than pulling the cable. If there is no sound, check for visible light only as directed by device instructions, confirm the cable is seated, and verify the selected output format and input source.

Compatible equipment

The OTN-A201 is suitable for equipment that has a matching Toslink optical output and input. Common examples in retailer pages include TVs, soundbars, home theater receivers, gaming consoles, and audio interfaces. Some devices use a combined 3.5mm optical/analog port or omit optical audio entirely; confirm the exact port before ordering. The cable does not convert an analog signal to digital or add an optical port to a device.

Gold-plated connector listing

Star Tech and Astrix describe a gold-plated connector. This is a retailer specification and does not by itself establish improved digital audio quality, a particular contact design, or long-term corrosion performance. The functional requirement is a compatible optical Toslink plug and a supported signal format at both connected devices. The product listing does not provide a third-party certification or detailed fiber specification.

Limitations and buying checks

Optical Toslink does not support every audio format available over other connections. The reviewed OTN-A201 pages do not provide a maximum sample rate, channel count, cable attenuation, or certification. Confirm the audio format and channel mode required by your equipment, particularly for surround-sound or high-resolution audio setups. Check that both devices have Toslink ports and that the 1m cable length is sufficient.

Package and warranty

Astrix identifies an Onten OTN-A201 1m Toslink digital optical audio cable; retailer pages may differ in package and warranty details. Warranty is not consistently stated in the reviewed model listings, so confirm the written terms for the chosen BiponiBD seller. The cable is the item described; protective caps or other accessories should not be assumed unless the seller confirms them. Keep the receipt and warranty documentation if supplied.

Storage and troubleshooting

When not in use, replace any supplied dust caps and store the cable in a loose loop. Avoid moisture, dust, sharp bends, heavy objects, and repeated pulling at the plug. If audio drops out, re-seat both ends, inspect the cable for kinks, select optical output on the source, and choose a compatible input and audio mode on the receiver. Test another cable or port to isolate a device configuration issue.

Key features

  • 1m Toslink-to-Toslink optical audio cable
  • 5.0mm line diameter listed by Star Tech/Astrix
  • Gold-plated connectors listed by retailers
  • For compatible optical S/PDIF audio ports
  • S/PDIF, ADAT, Dolby Digital, DTS listed as compatible formats
  • Digital optical connection between audio devices
  • Onten model OTN-A201 identified by retailers

Advantages

  • Connects matching optical audio ports without an electrical audio link
  • 1m length suits nearby television and sound system setups
  • Toslink connectors are common on compatible TVs and audio equipment

Limitations

  • Requires Toslink ports at both ends; no conversion to HDMI or analog
  • Actual format and channel support depends on the source and receiver
  • Maximum sample rate, fiber details, and warranty are not consistently specified

Frequently asked questions

What is the Onten OTN-A201?

A 1m digital optical audio cable with Toslink connectors at both ends.

What is the cable length?

Retailers list 1 metre.

What line diameter is listed?

Star Tech and Astrix list a 5.0mm line diameter.

Which ports does it connect?

A Toslink optical digital audio output to a matching Toslink input.

Which audio formats are mentioned?

Listings mention S/PDIF, ADAT, Dolby Digital, and DTS; actual support depends on both devices.

Will it work with a soundbar?

Yes, if the source and soundbar both have compatible Toslink optical ports and audio settings.

Does it convert analog audio or HDMI?

No. It is an optical Toslink-to-Toslink cable, not a format converter.

Are the connectors gold plated?

Star Tech and Astrix list gold-plated connectors; this is a retailer-stated construction detail.

What audio quality or channels does it support?

The reviewed exact-model pages do not specify maximum sample rate or channel count. Check device manuals.

What warranty is included?

Warranty terms are not consistent across the reviewed sources; confirm the selected BiponiBD seller policy.

Source basis: Exact-model listings from Star Tech, Astrix, Ryans and Syntech. Format support is attributed to retailer pages and remains dependent on both connected devices.

Features

  • 1m Toslink-to-Toslink optical audio cable
  • 5.0mm line diameter listed by Star Tech/Astrix
  • Gold-plated connectors listed by retailers
  • For compatible optical S/PDIF audio ports
  • S/PDIF, ADAT, Dolby Digital, DTS listed as compatible formats
  • Digital optical connection between audio devices
  • Onten model OTN-A201 identified by retailers

Pros

  • Connects matching optical audio ports without an electrical audio link
  • 1m length suits nearby television and sound system setups
  • Toslink connectors are common on compatible TVs and audio equipment

Cons

  • Requires Toslink ports at both ends; no conversion to HDMI or analog
  • Actual format and channel support depends on the source and receiver
  • Maximum sample rate, fiber details, and warranty are not consistently specified

Helpful answers

Frequently asked questions

Product-specific answers maintained with the catalog information.

What is the Onten OTN-A201?

A 1m digital optical audio cable with Toslink connectors at both ends.

What is the cable length?

Retailers list 1 metre.

What line diameter is listed?

Star Tech and Astrix list a 5.0mm line diameter.

Which ports does it connect?

A Toslink optical digital audio output to a matching Toslink input.

Which audio formats are mentioned?

Listings mention S/PDIF, ADAT, Dolby Digital, and DTS; actual support depends on both devices.

Will it work with a soundbar?

Yes, if the source and soundbar both have compatible Toslink optical ports and audio settings.

Does it convert analog audio or HDMI?

No. It is an optical Toslink-to-Toslink cable, not a format converter.

Are the connectors gold plated?

Star Tech and Astrix list gold-plated connectors; this is a retailer-stated construction detail.

What audio quality or channels does it support?

The reviewed exact-model pages do not specify maximum sample rate or channel count. Check device manuals.

What warranty is included?

Warranty terms are not consistent across the reviewed sources; confirm the selected BiponiBD seller policy.

Customer community

Reviews & product Q&A

No ratings yet

Choose your own rating. BiponiBD never adds a default rating or review.

Be the first customer to review an available Store offer.
Back to all products

Become a merchant

Put your store in front of ready buyers.

Join BiponiBD, publish accurate offers and start free.

Start free