Pros
- Connects DisplayPort-output sources to HDMI displays
- 1.8m length for nearby desktop or presentation setups
- Audio support described alongside video
All categories
New conditionComputer Accessories
Onten · OTN-DP302
Onten OTN-DP302 is a 1.8m DisplayPort male-to-HDMI male cable for one-way DP source to HDMI display use, listed up to 1080p at 60Hz.
Approximate Market Price
BDT 500
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 500
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Onten OTN-DP302 is a 1.8-metre cable with a DisplayPort male connector and an HDMI male connector. It is intended to connect a DisplayPort video source to an HDMI display or receiver. Star Tech lists support up to 1920 × 1080 at 60Hz, and Ryans lists 1920 × 1080 resolution. Star Tech describes transmission of video and audio. Check direction and resolution carefully: this cable does not convert an HDMI source into a DisplayPort output, and 4K support is not confirmed by the reviewed Bangladesh exact-model specifications.
Connect the DisplayPort male end to the source output and the HDMI male end to a display or receiver input. This is a DisplayPort-source-to-HDMI-display connection. It cannot be reversed by swapping plugs. For an HDMI laptop connected to a DisplayPort monitor, use a converter designed specifically for HDMI-to-DisplayPort direction. Check port labels before purchase because a cable that physically fits one end may still send signal in the wrong direction.
The Star Tech exact-model page lists up to 1920 × 1080 at 60Hz, and the Ryans listing specifies 1920 × 1080. Source device, graphics hardware, display and operating system must all support the selected mode. The manufacturer’s DP302 page has less detailed resolution text, so 1080p60 is attributed to the local retailer specification. Do not assume 4K or higher refresh rates without written confirmation for this model and connected devices.
Star Tech describes the cable as transmitting audio and video. Audio depends on the DisplayPort source sending audio and the HDMI display or receiver supporting playback. The reviewed listings do not identify supported audio codecs, channel counts or high-resolution audio modes. If there is picture but no sound, select the HDMI display as the audio output in source settings and confirm the display or receiver has an audio path.
The source must provide video through a DisplayPort output. A USB-C connector is not the same plug; a compatible USB-C-to-DisplayPort adapter may be needed if the host supports DisplayPort Alt Mode. A Ryans answer says passive DP-to-HDMI cables typically require DP++ support, while Onten lists a chip in the DP302 housing. Because exact active/passive and power requirements are not consistently documented, confirm host compatibility with the seller or Onten.
The HDMI end connects to an HDMI input on a monitor, TV, projector or receiver. Select the correct HDMI input and choose a source resolution supported by both ends. If there is no picture, reseat the plugs, check the display input, restart the source, test 1080p and remove intermediate switches or receivers while diagnosing. The cable cannot add HDMI input to a display that lacks it or convert HDMI output from the source in the reverse direction.
The selected item is 1.8 metres and black. Star Tech lists gold-plated connectors, tinned copper wire and aluminum material; Onten lists an ABS case with a chip and 5.5mm outer diameter. These pages describe construction in different ways, so they are not presented as one single material specification for every cable section. Route the lead without sharp bends or tension, and hold the connector housing when unplugging it.
The reviewed Bangladesh exact-model pages support 1080p/60Hz or 1920 × 1080. An international reseller lists 4K30, but that conflicts with local specifications and is not adopted as a verified claim for this listing. The OTN-DP302 should be matched to a DisplayPort source and HDMI target; it does not convert HDMI-to-DP, VGA, DVI or USB video by itself. Check model manuals for maximum output and signal mode.
Ryans and Star Tech list a two-year warranty. Confirm the seller’s written coverage, claim address, exclusions and whether the warranty applies to the exact cable length. Before checkout, verify OTN-DP302, 1.8m, DisplayPort male to HDMI male, black, 1080p/60Hz listing and required signal direction. BiponiBD price, stock and seller warranty were not checked during this content update.
This cable may suit a setup that needs a DisplayPort-output computer connected to an HDMI-input monitor or projector at up to the listed 1080p/60Hz mode. Its 1.8m length is appropriate for nearby equipment. It is not suitable for HDMI-source-to-DisplayPort-display connections, a confirmed 4K requirement or a host without DisplayPort video output unless another compatible conversion step is used.
The OTN-DP302 is a DisplayPort male source-side plug to HDMI male display-side plug cable. Use it from a DisplayPort output to an HDMI input; it does not work in reverse from HDMI source to DisplayPort display.
Star Tech lists up to 1920 × 1080 at 60Hz, and Ryans lists 1920 × 1080. A compatible source, display and system configuration are required. 4K support is not verified by the reviewed local exact-model listings.
Star Tech describes audio and video transmission. Audio output also depends on the source’s DisplayPort audio support and the HDMI display or receiver. The reviewed listings do not specify supported codecs or channel formats.
Not with this cable. Its signal direction is DisplayPort source to HDMI display. HDMI-to-DisplayPort setups require a converter designed for the opposite direction.
Only if the USB-C port supports DisplayPort video output and an appropriate USB-C-to-DisplayPort adapter is used. This cable’s source plug is full-size DisplayPort, not USB-C.
A Ryans product Q&A says passive DP-to-HDMI cables typically require a DP++ compatible source. The manufacturer also lists a chip in the cable housing, so confirm the exact device requirements with Onten or the seller rather than assuming every DP port works.
The selected OTN-DP302 listing is 1.8 metres and black. Onten sells other cable models and lengths; verify the exact OTN-DP302 1.8m item before ordering.
Star Tech lists gold-plated connectors, tinned copper wire and aluminum material. Onten describes the DP302 as having an ABS case with a chip and 5.5mm outer diameter. Verify packaging if a particular material is required.
Star Tech and Ryans list a two-year warranty for the OTN-DP302 1.8m cable. Confirm the seller’s written coverage, claim steps and exclusions for the selected item.
This content review did not verify a live BiponiBD offer, stock or checkout price. Confirm availability, compatibility and warranty with the seller before purchase.
Helpful answers
Product-specific answers maintained with the catalog information.
The OTN-DP302 is a DisplayPort male source-side plug to HDMI male display-side plug cable. Use it from a DisplayPort output to an HDMI input; it does not work in reverse from HDMI source to DisplayPort display.
Star Tech lists up to 1920 × 1080 at 60Hz, and Ryans lists 1920 × 1080. A compatible source, display and system configuration are required. 4K support is not verified by the reviewed local exact-model listings.
Star Tech describes audio and video transmission. Audio output also depends on the source’s DisplayPort audio support and the HDMI display or receiver. The reviewed listings do not specify supported codecs or channel formats.
Not with this cable. Its signal direction is DisplayPort source to HDMI display. HDMI-to-DisplayPort setups require a converter designed for the opposite direction.
Only if the USB-C port supports DisplayPort video output and an appropriate USB-C-to-DisplayPort adapter is used. This cable’s source plug is full-size DisplayPort, not USB-C.
A Ryans product Q&A says passive DP-to-HDMI cables typically require a DP++ compatible source. The manufacturer also lists a chip in the cable housing, so confirm the exact device requirements with Onten or the seller rather than assuming every DP port works.
The selected OTN-DP302 listing is 1.8 metres and black. Onten sells other cable models and lengths; verify the exact OTN-DP302 1.8m item before ordering.
Star Tech lists gold-plated connectors, tinned copper wire and aluminum material. Onten describes the DP302 as having an ABS case with a chip and 5.5mm outer diameter. Verify packaging if a particular material is required.
Star Tech and Ryans list a two-year warranty for the OTN-DP302 1.8m cable. Confirm the seller’s written coverage, claim steps and exclusions for the selected item.
This content review did not verify a live BiponiBD offer, stock or checkout price. Confirm availability, compatibility and warranty with the seller before purchase.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.