Pros
- Single HDMI cable carries supported audio and video
- Compact 1.5m length for nearby devices
- Published 8K at 60Hz capability
All categories
New conditionComputer Accessories
Onten · OTN-HD183
Onten OTN-HD183 is a 1.5m HDMI male-to-male cable listed for 8K at 60Hz, 48Gbps bandwidth and audio. Confirm device support and certification for your setup.
Approximate Market Price
BDT 550
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 550
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Onten OTN-HD183 is a 1.5-metre HDMI cable with male HDMI connectors at both ends. Onten’s manufacturer page identifies the model as HDMI 2.1 and lists 8K (7680 × 4320) at 60Hz with audio support. A Bangladesh retailer lists 48Gbps bandwidth for the model. These are published capabilities; the source device, display or receiver must also support the selected video mode and audio features. The manufacturer lists a CCS conductor and PVC construction with a 6.2mm outer diameter.
Connect one HDMI male plug to the source output and the other to the display or receiver input. HDMI carries digital video and audio over the same connection. Select the correct input on the display and configure the source to a mode supported by all devices in the chain. Insert and remove the cable by its connector housing rather than pulling the wire. Do not force a plug into DisplayPort, USB-C or other non-HDMI sockets that may look similar from a distance.
The manufacturer lists 8K resolution at 60Hz for OTN-HD183. The connected source, graphics hardware, display, receiver and any intermediate device must all support that resolution and refresh rate. Display settings, color format, bit depth and signal configuration can affect which modes are available. If 8K does not appear, check each device’s HDMI port capabilities, firmware, input selection and settings. A cable specification alone does not guarantee that a particular laptop, console or television can output 8K.
Ryans lists 48Gbps bandwidth for the OTN-HD183. This figure describes the model’s published data rate; actual operation depends on the full HDMI link. The reviewed manufacturer product page does not provide verified details for every feature sometimes associated with HDMI 2.1, such as HDR formats, VRR, ALLM, eARC or 4K at 120Hz. One local retailer Q&A says 4K at 120Hz is supported, but confirm the exact mode and device combination with the seller before relying on it. No certification label was checked for this specific catalog unit.
Onten lists audio support, so the cable can carry supported audio alongside video over HDMI. The exact codecs, channel counts, sample rates and passthrough behavior are not itemized in the reviewed manufacturer listing. Audio output depends on the source settings and the capabilities of the display, AV receiver or sound system. If sound is missing, check the selected HDMI audio device, mute level and format compatibility. This is not an analog 3.5mm audio cable.
This catalog product is the 1.5-metre version; other OTN-HD183 lengths are sold separately. The manufacturer lists CCS and PVC construction and a 6.2mm outer diameter. The 1.5m retail listing identifies it as black. Measure the route between devices and leave enough slack to avoid tension, tight bends or connector strain. Keep the cable away from sharp edges and avoid crushing it behind furniture. The manufacturer’s material listing should not be treated as a substitute for physical inspection.
The cable uses standard HDMI male connectors, but 8K at 60Hz requires compatible HDMI ports across the complete setup. Older ports may still pass lower modes supported by the source and display, but advanced formats can be limited by the least capable device in the chain. Check the manuals for the exact HDMI version and supported resolutions on the computer, console, receiver and television. This passive cable does not upgrade an HDMI 2.0 source to HDMI 2.1 features.
Ryans lists a two-year warranty for OTN-HD183 1.5m. Warranty duration and claim conditions may differ by retailer, so confirm the written coverage and keep proof of purchase. The specific BiponiBD item’s certification status, batch provenance and warranty are not independently verified here. If a certified cable is required for a high-bandwidth installation, check the package label and seller documentation for the exact unit rather than relying only on a model-level marketing description.
The cable cannot create a higher resolution than the source or display supports. It cannot convert HDMI to DisplayPort, VGA or USB-C, and it does not split video or audio into separate connectors. For a blank screen, reseat both HDMI plugs, select the correct input, test a lower output resolution and remove intermediate devices while diagnosing. For intermittent signal, check connector seating, routing strain and each device’s HDMI mode settings.
The OTN-HD183 1.5m may suit a user who needs a short male-to-male HDMI connection and whose devices support the listed 8K-at-60Hz capability. It can carry compatible audio with video on one cable and is listed with 48Gbps bandwidth by a local retailer. It may not suit a long installation, a source or display without HDMI, or a setup requiring unverified advanced features without confirming those needs with the seller and device manufacturers.
It is listed as HDMI male to HDMI male on both ends. Connect it between an HDMI source output and an HDMI display input.
This catalog version is 1.5 metres. OTN-HD183 is also sold in other lengths, so check the package and selected product length before ordering.
The manufacturer lists 8K (7680 × 4320) at 60Hz for the OTN-HD183. The connected source and display must both support the requested mode; the cable alone cannot create 8K output.
Ryans lists 48Gbps for this model. Actual video modes depend on the source, display, settings and the complete HDMI link. No certification label or test result was verified for the specific BiponiBD item.
The manufacturer lists audio support. HDMI can carry video and audio together, but supported audio formats depend on the connected source and display or receiver; specific codecs are not stated in the reviewed product data.
The manufacturer labels OTN-HD183 as HDMI 2.1 and specifies 8K at 60Hz. Compatibility still depends on HDMI capabilities at both connected devices.
These features are not confirmed consistently in the manufacturer specification reviewed for this cable. Although a retailer Q&A mentions 4K at 120Hz based on the listed bandwidth, confirm the precise mode and features with the seller and device makers.
The manufacturer lists CCS and PVC with a 6.2mm outer diameter. Retailer listings describe the 1.5m version as black. Construction claims do not replace checking the cable if a particular installation requirement applies.
Ryans lists a two-year warranty for the 1.5m OTN-HD183. Warranty terms can vary by seller and channel; confirm the written terms and claim procedure for the item you purchase.
This content update did not verify a live BiponiBD offer, stock or checkout price. Confirm the current price, length and warranty with the seller before ordering.
Helpful answers
Product-specific answers maintained with the catalog information.
It is listed as HDMI male to HDMI male on both ends. Connect it between an HDMI source output and an HDMI display input.
This catalog version is 1.5 metres. OTN-HD183 is also sold in other lengths, so check the package and selected product length before ordering.
The manufacturer lists 8K (7680 × 4320) at 60Hz for the OTN-HD183. The connected source and display must both support the requested mode; the cable alone cannot create 8K output.
Ryans lists 48Gbps for this model. Actual video modes depend on the source, display, settings and the complete HDMI link. No certification label or test result was verified for the specific BiponiBD item.
The manufacturer lists audio support. HDMI can carry video and audio together, but supported audio formats depend on the connected source and display or receiver; specific codecs are not stated in the reviewed product data.
The manufacturer labels OTN-HD183 as HDMI 2.1 and specifies 8K at 60Hz. Compatibility still depends on HDMI capabilities at both connected devices.
These features are not confirmed consistently in the manufacturer specification reviewed for this cable. Although a retailer Q&A mentions 4K at 120Hz based on the listed bandwidth, confirm the precise mode and features with the seller and device makers.
The manufacturer lists CCS and PVC with a 6.2mm outer diameter. Retailer listings describe the 1.5m version as black. Construction claims do not replace checking the cable if a particular installation requirement applies.
Ryans lists a two-year warranty for the 1.5m OTN-HD183. Warranty terms can vary by seller and channel; confirm the written terms and claim procedure for the item you purchase.
This content update did not verify a live BiponiBD offer, stock or checkout price. Confirm the current price, length and warranty with the seller before ordering.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.