Pros
- Carries video and supported audio over a single HDMI connection.
- Two-metre length provides a defined reach for nearby source and display connections.
All categories
New conditionComputer Accessories
Onten · OTN-HD183
Onten OTN-HD183 is a 2m HDMI cable advertised by Star Tech for up to 8K (7680 × 4320) at 60Hz with audio support. The retailer lists CCS conductors, a PVC jacket and 6.2mm outer diameter. Actual display modes depend on the complete device chain; Ultra High Speed certification has not been verified.
Approximate Market Price
BDT 650 – BDT 810
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Compare store prices
No live offers for this variant
BDT 650 – BDT 810
Approximate Market Price
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Loading history…
Product story
The Onten OTN-HD183 is a two-metre HDMI cable marketed for high-resolution video and audio connections. Star Tech describes this version as an 8K HDMI 2.1 cable and advertises a maximum video mode of 7680 × 4320 at 60Hz. Its stated construction uses CCS conductors and a PVC outer jacket, with an outer diameter of 6.2mm. This listing separates those retailer claims from capabilities that still require exact-model verification.
The advertised 8K mode is a capability claim for use with compatible equipment. The cable cannot make an older graphics output, television or monitor support a mode that the device does not provide. The source output, display input, any receiver or switch in between, and their settings must all support the intended signal.
Check the exact HDMI port on each device. A display can have different capabilities across its inputs, and a computer may require the desired resolution and refresh rate to be selected in its display settings. Content resolution and game rendering performance are separate from the cable rating. This page does not promise that every console or computer will deliver 8K at 60Hz simply by connecting this cable.
The retailer calls this an HDMI 2.1 cable. An Ultra High Speed HDMI certification label, a verified certification record and an independent bandwidth test for this exact two-metre product were not established during this review. The version wording should therefore not be treated as proof of certification or of every feature associated with newer HDMI equipment.
Exact link bandwidth, colour depth, chroma format, compression requirements, HDR formats, variable refresh rate, auto low-latency mode and eARC capability were not confirmed by the checked source. If one of those features is essential to a gaming or home-theatre installation, obtain exact-model documentation and confirm the capabilities of the whole signal chain before buying.
Star Tech lists audio support as well as video. This means the cable is intended for an HDMI audiovisual connection, but it does not establish every surround-sound codec or return-audio feature. Audio output settings and the receiving device determine which supported format is used. Confirm the required audio format with your source, display or receiver documentation.
An HDMI cable is not a converter for an unrelated connector. A laptop with only USB-C or DisplayPort output may need a suitable adapter, and that adapter can impose its own resolution and refresh-rate limits. Check the physical ports and the capabilities of any adapter separately. Wireless connectivity is not a feature of this cable.
This catalog record describes the two-metre OTN-HD183. Other listings may use the same model family with different lengths, so compare the supplied length as well as the model name. Measure the intended route between devices and allow enough slack to avoid pulling sideways on a connector. A nominal two-metre cable may be unsuitable for a longer route around furniture or through a wall.
The retailer specifies CCS conductors, PVC jacketing and a 6.2mm outside diameter. These construction details do not establish an optical-fibre design, pure-copper conductors, waterproofing or an in-wall fire rating. No in-wall installation certification was verified. Avoid tight bends and check that there is enough clearance behind a wall-mounted display for the connector and cable to sit without strain.
Connect the cable to the intended HDMI ports and select the correct display input. Start with a mode supported by both devices, then select the required higher-resolution mode where available. If the picture is unstable, check the chosen resolution, refresh rate and colour settings, and isolate adapters, switches or receivers that may limit the connection.
A cable product claim does not guarantee zero latency, zero distortion or a specific improvement in image quality over another functioning digital link. Those blanket performance promises have not been carried into this listing. For a demanding setup, test the complete connection under the resolution and refresh rate you actually intend to use.
Star Tech lists a two-year replacement warranty for this offer. Confirm the supplying seller’s terms, exclusions, invoice requirements and replacement process. That retailer warranty does not independently establish a manufacturer certification or a guarantee that an unsupported device combination will work.
Before ordering, confirm model OTN-HD183, two-metre length, connector fit and any required certification label on the package. A manufacturer part number, verified GTIN, country of origin, weight and complete package contents were not established from the accessible evidence, so these values are not inferred from the product title. Approximate market pricing is informational and should be compared with a live seller offer.
The checked source is Star Tech’s Onten OTN-HD183 2m listing. The manufacturer search result did not provide a readable exact-model page during this review, so manufacturer-only claims and certification details remain unverified.
Helpful answers
Product-specific answers maintained with the catalog information.
Star Tech advertises up to 7680 × 4320 at 60Hz. The source, display, intermediate devices and settings must support the intended mode; the cable cannot upgrade unsupported hardware.
Yes, this record follows the retailer’s two-metre OTN-HD183 listing. Confirm the package length because other listings use the same model family for different lengths.
No. A certification label or exact-model certification record was not verified. The retailer’s HDMI 2.1 wording should not be treated as proof of certification.
The retailer lists audio support. Specific codecs, eARC and return-audio features were not verified for this exact item; check your source and receiver requirements.
Those detailed modes and their colour-depth or compression conditions were not established from the checked source. Confirm exact-model documentation and both devices before relying on them.
Star Tech lists CCS conductors and PVC with a 6.2mm outside diameter. This does not establish pure-copper construction, optical fibre or an in-wall installation rating.
A separate compatible adapter may be required because this is an HDMI cable. The adapter’s supported display modes can limit the connection.
Star Tech lists two years of replacement warranty. Confirm the supplying seller’s terms, exclusions and proof-of-purchase requirements.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.