Pros
- Manufacturer datasheet provides measurable technical specifications
- Suitable for listed CPU, GPU, notebook and IC applications
- Small package includes a spatula according to manufacturer
All categories
New conditionComputer Accessories
Thermal Grizzly · Aeronaut 1g Thermal Compound
Thermal Grizzly Aeronaut 1g is a non-electrically conductive thermal compound for CPUs and GPUs; the manufacturer lists a spatula in the 1g package.
Approximate Market Price
BDT 650
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 650
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
Thermal Grizzly Aeronaut is a thermal compound for transferring heat across the interface between a processor or other compatible component and its cooler. The manufacturer lists the 1g variant as a gray, non-electrically conductive compound with density 2.6g/cm³, viscosity 110–160Pa·s, thermal resistance 0.0129K/W and a stated temperature range of −150°C to +200°C. The official 1g scope of delivery is one Aeronaut unit and one TG spatula. Confirm that the seller is supplying the 1g size and the correct sealed product.
Thermal compound fills microscopic surface irregularities between a heat-producing component and a correctly mounted heatsink, helping reduce insulating air gaps. Aeronaut is a paste/grease compound, not a thermal pad, adhesive, liquid metal or replacement heatsink. It must be applied in an appropriate thin layer to a compatible surface and used with a properly mounted cooler. It does not repair a faulty fan, loose heatsink, clogged ventilation or inadequate cooling design.
Thermal Grizzly’s datasheet lists gray color, thermal resistance 0.0129K/W, electrical conductivity 0pS/m according to DIN 51412-1, viscosity 110–160Pa·s, specific weight 2.6g/cm³ and temperature range −150°C to +200°C. These are manufacturer-published compound specifications; they do not directly predict a particular CPU temperature or guarantee a fixed temperature reduction. Cooler design, contact pressure, application, component power and airflow all matter.
The item is the small 1g package. The manufacturer datasheet lists one Aeronaut unit and one TG spatula as the scope of delivery for the 1g size. Retailer packing and local stock may vary, so check the sealed box contents. One gram is a limited amount; the number of applications depends on component size, how much is applied and whether any product remains in the applicator. The listed 1g is compound quantity, not package gross weight.
The manufacturer identifies CPUs, GPUs, notebooks and ICs as typical applications. Compatibility also depends on cooler contact surfaces and device construction. For a laptop, graphics card or game console, disassembly can be difficult and may affect warranty; follow the device maker’s service instructions or use a qualified technician. Do not use the compound as a thermal pad where a specified gap-filling pad is required, and do not substitute it for electrically conductive liquid metal in a design that calls for a different material.
The official datasheet reports electrical conductivity of 0pS/m using DIN 51412-1 and a temperature range of −150°C to +200°C. Do not interpret this as permission to spill paste across a circuit board or connector. Apply only to the intended heat-transfer surface, keep it off contacts and sockets, and clean accidental residue according to the manufacturer’s guidance. The operating temperature range describes the compound rating and is not a recommended CPU target temperature.
Power down and disconnect the system before service. Remove the old compound carefully using an appropriate cleaning method, allow the surface to dry, then apply a small, even amount following the CPU/GPU and cooler manufacturer’s instructions. Install the cooler evenly and tighten it in the specified sequence. Excess paste or uneven mounting can impair contact or create mess. The supplied spatula can help spread the compound, but the manufacturer or device instructions should determine the application method.
Store the product in its original packaging in a dry environment at room temperature, consistent with manufacturer material. Keep the cap closed when not in use and avoid contamination with dust, oils or other compounds. Keep it away from children and avoid contact with eyes or mouth. Do not use a package that is open, dried out, contaminated or beyond any printed shelf-life guidance. Dispose of packaging and residue according to local rules and the product label.
Aeronaut is presented by Thermal Grizzly as an entry-level thermal compound with good effectiveness. A thermal-resistance number and product class are not a promise of a specific temperature drop, overclocking result, noise level or lifespan on a particular system. Results depend on the device and installation. The official specification does not state a guaranteed service interval, independent benchmark result or cooling performance for each CPU model. Monitor temperatures after installation and investigate cooling problems beyond the paste itself.
The manufacturer product page and datasheet identify Aeronaut and its variants, but warranty terms depend on the local seller and the specific BiponiBD offer. Confirm brand authenticity, 1g size, sealed condition, batch/label, included spatula and seller warranty/return conditions before purchase. Avoid substituting Aeronaut with similarly named Thermal Grizzly products such as Kryonaut or Hydronaut; their specifications and intended use differ. Check the exact product code if the package labeling is important.
It is a thermal compound for a heat-transfer interface between compatible CPUs, GPUs, notebooks or ICs and a cooler.
This listing is for the 1g variant.
The manufacturer datasheet lists one Aeronaut unit and one TG spatula; check the sealed retail package.
The manufacturer datasheet reports 0pS/m according to DIN 51412-1. Apply only to the intended surface and keep it off contacts.
The manufacturer lists a specific weight of 2.6g/cm³.
The manufacturer lists 110–160Pa·s.
The datasheet states −150°C to +200°C; this is a compound specification, not a target device temperature.
The manufacturer lists GPUs and notebooks as typical applications, but follow the device service instructions or use a qualified technician.
No. It is a paste/grease compound and does not replace a gap-filling pad where one is required.
No fixed temperature reduction is guaranteed; results depend on hardware, mounting, application and cooling.
Source note: Thermal Grizzly official Aeronaut product page and datasheet; local retailer listing used to identify the 1g Bangladesh offer. Datasheet says 1g includes one compound unit and TG spatula. Performance depends on device, application and cooler installation.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a thermal compound for a heat-transfer interface between compatible CPUs, GPUs, notebooks or ICs and a cooler.
This listing is for the 1g variant.
The manufacturer datasheet lists one Aeronaut unit and one TG spatula; check the sealed retail package.
The manufacturer datasheet reports 0pS/m according to DIN 51412-1. Apply only to the intended surface and keep it off contacts.
The manufacturer lists a specific weight of 2.6g/cm³.
The manufacturer lists 110–160Pa·s.
The datasheet states −150°C to +200°C; this is a compound specification, not a target device temperature.
The manufacturer lists GPUs and notebooks as typical applications, but follow the device service instructions or use a qualified technician.
No. It is a paste/grease compound and does not replace a gap-filling pad where one is required.
No fixed temperature reduction is guaranteed; results depend on hardware, mounting, application and cooling.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.