Pros
- Silicone-free and electrically non-conductive formula
- No curing time required according to the manufacturer
All categories
New conditionComputer Accessories
Thermal Grizzly · Hydronaut
Thermal Grizzly Hydronaut 1g is a silicone-free, electrically non-conductive thermal paste for CPU and GPU heatsink interfaces, with no curing time required.
Approximate Market Price
BDT 950
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Compare store prices
No live offers for this variant
BDT 950
Approximate Market Price
Informational market estimate only; this is not a current Store offer. Last checked Nov 11, 2026. Source
Loading history…
Product story
Thermal Grizzly Hydronaut is a silicone-free thermal interface paste intended to fill microscopic gaps between a processor and its cooler. This 1 g pack is designed for use at a compatible CPU or GPU heatsink contact surface, helping heat transfer from the chip to the cooling assembly. The result depends on the cooler, mounting pressure and the condition of the surfaces.
The manufacturer describes Hydronaut as suitable for medium to large cooling systems, including water-cooled heatsinks, and for overclocking applications. It is applied between the chip and the cooler; it is not a liquid coolant and must not be poured into a cooling loop. Check the instructions for your device and cooler before opening or servicing them.
Hydronaut is silicone-free, electrically non-conductive and does not require a curing period according to Thermal Grizzly. Apply it carefully and avoid spreading paste onto nearby components. Electrical non-conductivity does not replace proper handling or equipment precautions.
Power off and disconnect the computer before servicing it. Remove the cooler according to its instructions and clean the old compound from the contact surfaces using a suitable cleaning method. Apply an appropriate thin, even layer of paste, refit the cooler with the recommended mounting pressure, and check that the cooling system operates normally. Follow the device manufacturer’s instructions; laptop and GPU servicing can require specialist handling.
Star Tech lists density of 2.6 g/cm³, operating temperature of -200°C to +350°C and viscosity of 140–190 Pa·s for this product. These are listed material specifications, not a promise of the temperature your system will achieve. This listing is for the 1 g pack; confirm the exact package contents, seller availability and return terms before ordering. Star Tech lists no warranty, while the applicable terms should be confirmed with your seller.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a thermal interface paste applied between a compatible processor and cooler to help transfer heat across their contact surfaces.
Thermal Grizzly says Hydronaut does not require curing.
The manufacturer describes it as electrically non-conductive. Apply it carefully and follow the equipment instructions.
Yes, the manufacturer describes it as suitable for water-cooled heatsinks. It belongs on the chip-to-cooler contact surface, not inside the coolant loop.
This listing is for the 1 g pack. Confirm the package contents and seller terms before ordering.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.