Pros
- Adds a 3.5mm audio socket to compatible USB-C devices
- Compact cable length
- Headset mic/control support described by UGREEN
All categories
New conditionComputer Accessories
Ugreen · AV142
UGREEN AV142 (30632) is a 10cm USB-C male to 3.5mm female audio adapter for compatible USB-C audio devices.
Approximate Market Price
BDT 500
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 500
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The UGREEN AV142 (30632) is a short USB Type-C male to 3.5mm female audio adapter, listed at about 10cm. It provides a socket for a conventional wired headset or auxiliary audio plug when the connected USB-C host supports the adapter’s audio mode. Compatibility is the key buying check: some AV142 listings describe a passive analog adapter that relies on analog audio output from the host rather than converting digital USB audio itself. Confirm the exact device and adapter revision before purchase.
Connect the USB-C male plug to a compatible phone, tablet or computer. Connect a 3.5mm headset, earphone or auxiliary input to the female jack. This product is not a USB-A adapter, USB-C charging splitter or 3.5mm male-to-male cable. Its 10cm lead provides a small amount of separation between the device port and headset plug.
USB-C is a connector standard, but the audio capability of the port depends on the device. The checked retailer descriptions identify this AV142 as relying on analog audio output over USB-C. Devices that output only digital audio and require an active digital-to-analog converter may not work with a passive adapter. Check the phone, tablet or laptop specifications for analog accessory audio support.
Retail listings and product explanations are not fully consistent about whether this model contains a DAC. Some describe AV142/30632 as passive and host-dependent; some use broad “converter” wording without identifying a chipset. Do not assume a built-in DAC, sample rate or digital audio conversion unless the exact product revision documentation confirms it. If your device needs a DAC, select a clearly documented active adapter instead.
UGREEN’s official product page states that microphone and remote-control functions are supported and that the 3.5mm port works with CTIA and OMTP headset wiring. Actual call audio, volume or button control can still depend on the headset, host operating system and adapter revision. Check the headset’s plug standard if microphone input is important.
A compatible 3.5mm stereo headset, earphones or powered car/speaker AUX input may be connected through the female jack. This does not guarantee compatibility with every microphone, TRRS headset or professional audio device. For line-level equipment, verify input/output direction and level requirements to avoid unexpectedly quiet or distorted sound.
Retailer specifications state a cable length of about 10cm and describe enamelled copper conductors, braided cable and an aluminum alloy housing. These are seller-listed construction details. The short lead reduces bulk but provides limited distance from the host. Avoid sharply bending the wire at the USB-C plug or pulling the adapter by its cable.
Retailers describe the adapter as requiring no extra driver or software. Connect it to a supported host, then select the wired headset or USB-C audio output if the operating system presents an audio-device choice. Plug-and-play does not bypass host hardware requirements; a device without the required analog audio mode may produce no sound.
Check that the USB-C plug is fully seated, the headset works on another device and the host supports audio output through USB-C in the required mode. Inspect the 3.5mm jack and plug for debris and confirm the headset plug is inserted fully. If your device requires an active DAC, a passive AV142 revision may not be suitable.
For calls, verify that the headset is a compatible four-pole TRRS model and that its wiring matches CTIA or OMTP support. Confirm microphone permission and input selection in the operating system or app. The product listing does not guarantee compatibility with every headset control, device or conferencing application.
No charging port or pass-through power feature is listed for this adapter. It should be treated as an audio connection accessory only. It does not add charging capability, USB data ports or a separate volume control to a host device.
The compact adapter can connect a standard 3.5mm audio plug to supported USB-C devices and the official listing describes microphone and remote-control support for CTIA/OMTP headsets. Its practical use depends on host audio hardware and exact adapter revision; passive analog compatibility is narrower than universal USB-C support, and charging is not provided.
Before ordering, identify the exact phone, tablet or computer and confirm it supports the audio mode required by this AV142 revision. If the device requires digital-to-analog conversion, choose an adapter with a confirmed DAC. Verify headset microphone wiring, seller warranty and package contents, especially when purchasing for calls or a specific tablet.
It is a 10cm USB-C male to 3.5mm female audio adapter, model AV142 and part number 30632.
The adapter has a USB Type-C male plug and a 3.5mm audio female jack.
No. The sources describe analog audio output over USB-C. A phone must support compatible analog audio accessory mode; USB-C port shape alone is not enough. Confirm your exact device model.
The checked retailer information describes this AV142 as a passive analog adapter that relies on the host to output analog audio. Confirm the exact revision with UGREEN or the seller if your device requires a DAC-equipped adapter.
UGREEN’s official listing says the 3.5mm jack supports microphone and remote-control functions with CTIA/OMTP headsets. Functionality still depends on headset wiring and host support.
Retailers list approximately 10cm.
Only if the laptop’s USB-C port supports the required audio output mode. Some laptops may require a digital DAC adapter instead. Check the laptop manufacturer’s specifications.
The checked retailer information warns that devices requiring a DAC may not be compatible, and some listings explicitly exclude iPad Pro. Confirm your exact iPad model and audio mode.
Retailers describe plug-and-play operation without extra drivers, provided the host supports the adapter’s audio mode.
Retailer specifications list enamelled copper conductors, an aluminum alloy housing and braided cable. Exact construction should be confirmed from the package if it matters.
No charging connector or pass-through charging function is listed. It is an audio adapter only.
Warranty terms are seller-specific. The listing describes the adapter; confirm warranty and any included items with the selected seller.
Helpful answers
Product-specific answers maintained with the catalog information.
It is a 10cm USB-C male to 3.5mm female audio adapter, model AV142 and part number 30632.
The adapter has a USB Type-C male plug and a 3.5mm audio female jack.
No. The sources describe analog audio output over USB-C. A phone must support compatible analog audio accessory mode; USB-C port shape alone is not enough. Confirm your exact device model.
The checked retailer information describes this AV142 as a passive analog adapter that relies on the host to output analog audio. Confirm the exact revision with UGREEN or the seller if your device requires a DAC-equipped adapter.
UGREEN’s official listing says the 3.5mm jack supports microphone and remote-control functions with CTIA/OMTP headsets. Functionality still depends on headset wiring and host support.
Retailers list approximately 10cm.
Only if the laptop’s USB-C port supports the required audio output mode. Some laptops may require a digital DAC adapter instead. Check the laptop manufacturer’s specifications.
The checked retailer information warns that devices requiring a DAC may not be compatible, and some listings explicitly exclude iPad Pro. Confirm your exact iPad model and audio mode.
Retailers describe plug-and-play operation without extra drivers, provided the host supports the adapter’s audio mode.
Retailer specifications list enamelled copper conductors, an aluminum alloy housing and braided cable. Exact construction should be confirmed from the package if it matters.
No charging connector or pass-through charging function is listed. It is an audio adapter only.
Warranty terms are seller-specific. The listing describes the adapter; confirm warranty and any included items with the selected seller.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.