Pros
- Compact 0.3m lead can split a compatible analog audio connection
- Two female jacks can accept compatible 3.5mm plugs
- No battery or software setup is needed for passive analog use
All categories
New conditionComputer Accessories
VENTION · BBVBY 3.5mm Audio Splitter
Vention BBVBY splits one 3.5mm male audio connection to two female jacks over 0.3m. Confirm headset pinout and device compatibility before ordering.
Approximate Market Price
BDT 400
Informational market estimate only; this is not a current Store offer.
Compare store prices
No live offers for this variant
BDT 400
Approximate Market Price
Informational market estimate only; this is not a current Store offer.
Loading history…
Product story
The Vention BBVBY is a short 3.5mm audio splitter cable listed with one male plug and two female jacks. Bangladesh retailers describe a 0.3-meter length. It is designed to divide a compatible analog audio connection into two 3.5mm female sockets, but the exact wiring and supported headset pinout must match the connected devices. This is an analog audio accessory; it does not convert digital audio, add Bluetooth or guarantee that every headset and computer combination will work.
Retailer listings identify one 3.5mm male connector and two 3.5mm female connectors. The male end plugs into a compatible 3.5mm audio output or combo jack, and the two female ends accept compatible 3.5mm plugs. Product descriptions vary between “stereo splitter” and four-pole headset splitter language. Confirm the connector pole count and intended separation (headphone and microphone, or audio sharing) from the exact product package and device documentation before buying.
The BBVBY is sometimes listed as a 4-pole 3.5mm male splitter, but reviewed listings do not consistently document its wiring standard or identify which female jack carries microphone versus headphone signals. CTIA and OMTP headset wiring can differ, and computers may use separate headphone/microphone ports or a combined combo port. Do not assume it converts between CTIA and OMTP or that every headset microphone will function. Check the host and headset manuals and verify the product pinout.
The cable is marketed for analog audio splitting. An audio source may not drive two headphones at the same volume or quality as one; output level, impedance and sound quality depend on the source and both connected devices. This is not a powered headphone amplifier or a mixer with independent volume controls. It does not provide separate digital audio streams or independent source selection. For two listeners, use a suitable powered splitter if the source cannot drive both loads clearly.
Retailers specify a cable length of 0.3 meters. This short lead is intended to sit close to the audio source. Keep it free of tension, avoid tight bends at the plug and female sockets, and prevent pulls on connected headphones. The product listing gives approximately 3.5mm cable diameter, but this is not a confirmed conductor specification. No longer extension, adapter or storage case is confirmed as included.
Some Bangladesh listings specify an enamelled copper conductor, aluminum-alloy connector shell, TPE jacket and 29AWG wire. Star Tech also lists gold-plated plugs. These are retailer-published details; formal connector-plating thickness, shielding, strain-relief testing, durability cycle and audio measurements were not verified. Treat visual finish and batch variations according to the seller’s current offer. Keep the plugs clean and insert or remove them by holding the connector body rather than pulling the wire.
Check whether the device has a 3.5mm analog output or a compatible combo jack. Connect the splitter’s male plug, then attach only the intended headset or audio plugs to its female sockets. Some phones and laptops require USB-C/Lightning audio adapters or use USB/Bluetooth audio instead; those adapters are not included or confirmed. A device with separate microphone and headphone jacks may require the right wiring arrangement. Follow the host maker’s input/output instructions.
If there is no sound, check the selected output device and volume, reseat the connectors, and test each headphone directly on the source. If audio works but the microphone does not, confirm the splitter pinout, headset wiring and operating-system input selection. Test one connected device at a time. If the sound becomes quiet or distorted with two headphones, the source may not support the combined load; use a compatible powered audio splitter or amplifier.
Global Brand and other retailer listings may advertise a one-year warranty, but service terms depend on the selected seller and current offer. Confirm the warranty duration, claim process and service location. Check the model marking BBVBY, one male-to-two-female connector layout and 0.3m cable length on delivery. Other retailers’ prices or stock do not verify BiponiBD’s live offer. Keep the invoice and packaging for a service claim.
The BBVBY provides a compact 0.3m lead with one 3.5mm male plug and two female jacks, which can help split a compatible analog connection. Retail listings describe enamelled copper, TPE and aluminum-alloy construction. Its exact pole wiring and microphone routing are not consistently documented, and it cannot amplify or independently mix audio. Confirm the intended use and device pinout before connecting a headset or microphone.
Vention BBVBY is listed as a 3.5mm male-to-dual-female audio splitter with a 0.3m cable. It may be used only where the source and connected plugs match its wiring. Listings differ in how they describe stereo and headset use, so confirm pole count and mic routing. It is passive and does not amplify sound. Some retailers list one-year coverage; confirm the seller’s current warranty.
Helpful answers
Product-specific answers maintained with the catalog information.
The listed model is Vention BBVBY.
Listings specify one 3.5mm male and two 3.5mm female connectors.
Retailers list a 0.3-meter cable.
Some listings describe a four-pole headset splitter, but the pinout and jack assignment are not consistently documented; verify the product wiring.
No universal compatibility is guaranteed. Check headset wiring and the host combo-jack or separate-port requirements.
No. It is a passive splitter and does not include an amplifier or independent volume control.
Only if the source can drive both loads; volume and sound quality may change.
No digital adapter is confirmed; it uses analog 3.5mm connectors.
Some retailers specify enamelled copper, TPE jacket and aluminum-alloy shell; these are seller-published specifications.
Some retailers advertise one year; confirm the current seller coverage and claim process.
Customer community
Become a merchant
Join BiponiBD, publish accurate offers and start free.