Walton WD238I12 23.8-inch Full HD IPS Monitor
The Walton WD238I12 is a flat 23.8-inch (60.452 cm) IPS monitor with 1920 × 1080 Full HD resolution, a 16:9 aspect ratio and a three-sided frameless design. The black-glass-body model adds a wireless-charging pad to its stand. Walton’s current official page lists a 75Hz/100Hz refresh-rate option; some older retailer listings describe a 75Hz unit. Treat the maximum mode as revision-dependent and check the exact carton label and on-screen display before purchase.
Image quality and refresh rate
Walton lists 300 cd/m² brightness, a 1000:1 contrast ratio, 85% NTSC colour gamut, 16.7 million colours, 178° horizontal and vertical viewing angles (CR > 10), a 5ms response time and a 0.2745 × 0.2745 mm pixel pitch. The display uses an LED-backlit IPS panel with a haze surface and 3H hard coating. Its Full HD resolution is suited to everyday documents, browsing, classes, video calls and entertainment; it provides less detail and workspace than QHD or 4K at a similar screen size. The 75Hz/100Hz mode, picture profile and perceived brightness depend on the supplied revision, source device and settings.
HDR, AMD FreeSync, flicker-free operation and low-blue-light mode are listed by Walton. HDR is a supported feature, but the product page does not provide a separate HDR brightness or certification rating. These display features depend on the selected input, software and connected device; they do not guarantee a particular measured image quality or eye-comfort result.
Ports, USB and audio
Walton lists two USB-A ports, one HDMI 2.0 input, one USB-C port, one audio-out jack and DC input. The official description does not fully explain USB-C video, data or charging functions, so confirm the intended function with Walton or the seller before relying on that port for a laptop. Confirm which cables are included with the actual unit. Walton’s current specification lists one 3W speaker. One older seller answer conflicts, so verify the supplied revision if built-in audio is important; the audio-out port also allows external headphones or speakers.
Stand, wireless charging and setup
The built-in stand supports tilt from -5° to +15°. Height adjustment, swivel and pivot are not listed for this model, so plan desk height and viewing angle accordingly. The stand includes a wireless charging station rated up to 15W for supported devices. Charging speed and compatibility depend on the phone and charging standard; align the device on the charging area and follow its charging guidance. Do not assume the pad can charge every phone or provide 15W to every compatible device. Walton lists a Kensington lock and a 100 × 100 mm VESA mount for a compatible third-party arm or bracket; check mounting hardware, load rating and clearance before installation.
Power and physical specifications
Walton specifies a 12V, 4A adapter, AC 100–240V input, maximum power consumption of 45W and standby consumption of 0.5W. Net weight is 3.30 kg ±5% and gross packaged weight is 5.30 kg ±5%. The display itself is listed as flat and finished in black glass body. Leave adequate desk and cable space, especially when the stand’s wireless-charging pad is in use. The published weight and power figures should be checked against the label and adapter supplied with the exact revision.
Warranty and purchase checks
Walton’s current WD238I12 page lists two years for the panel, one year for the adapter and adapter board (SMPS), and three years for other parts. Its warranty note says the two-year panel term applies from sales dated 13 June 2024; terms can change and coverage may depend on purchase date. Before ordering, ask for the written warranty card, service location, exclusions, dead-pixel policy and coverage for the wireless-charging pad. Retain the invoice and verify the serial number against the warranty documents.
Who this monitor may suit
This model may suit a home or office desk where a compact Full HD IPS screen, HDMI connectivity and phone charging on the monitor stand are useful. USB-A and USB-C ports can reduce some desk clutter, subject to their documented functions on the exact revision. The tilt-only stand may be less suitable if you need height, swivel or portrait rotation adjustment. Users who need a guaranteed 100Hz mode should verify the carton and on-screen menu before paying, since retailer pages commonly describe the model as 75Hz while Walton’s current official page lists 75Hz/100Hz. Buyers who need dependable built-in audio should confirm the one 3W speaker with the seller.
Bangladesh price and availability
Walton’s official page displayed Tk. 17,450, while a retailer listing displayed Tk. 15,400 and an in-stock status when reviewed. These are third-party and manufacturer-page price observations, not a live BiponiBD Store offer. Prices, stock and warranty terms may change; confirm the final amount, delivery charge, return policy, exact refresh-rate revision and included accessories with the seller.
Published specifications
- Model: WD238I12, Black Glass Body
- Screen: 23.8-inch IPS, LED backlight, 1920 × 1080 Full HD, 16:9
- Refresh: 75Hz/100Hz listed by Walton; confirm exact unit and mode
- Brightness: 300 cd/m²; contrast: 1000:1
- Response: 5ms (manufacturer-listed; method not specified)
- Colour: 85% NTSC; 16.7 million colours; 178°/178° viewing angle
- Surface: haze, 3H hard coating; flat panel
- Ports: 2 × USB-A, 1 × HDMI 2.0, 1 × USB-C, audio out, DC input
- Audio: one 3W speaker listed by Walton
- Stand: tilt -5° to +15°; 15W maximum wireless charging for supported devices
- Features: HDR, AMD FreeSync, low-blue-light mode, flicker-free
- Mount/security: 100 × 100 mm VESA; Kensington lock
- Power: 12V/4A adapter; AC 100–240V; maximum 45W; standby 0.5W
- Weight: 3.30 kg ±5% net; 5.30 kg ±5% gross
- Warranty: panel 2 years, adapter/adapter board 1 year, other parts 3 years (confirm current terms)
Sources
Walton official WD238I12 Black Glass Body specifications, price and warranty; Creatus retailer listing; TechLand retailer listing.